Sony MZ-G750 Operating Instructions - Page 70
Hi DC in HI dcin, HOLD Hold, LOW BATT Lo batt, MEM OVER, NO COPY, NO DISC no dISC, NO SIGNAL, P/B ONLY
View all Sony MZ-G750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Hi DC in (HI dcin Voltage of the power supply is too high (The supplied AC power adaptor is not used). - Use the supplied AC power adaptor. HOLD (Hold) • The recorder is locked. - Move HOLD against the arrow to unlock the recorder (page 13). LOW BATT (Lo batt) • Battery is weak. - Charge the rechargeable battery or replace the dry battery (page 12). MEM OVER You tried to record with the recorder placed where it receives continuous vibration. - Put the recorder on a stable place, and start recording again. NO COPY You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. - Use analog connection instead (page 27). NO DISC (no dISC) • You tried to play or record with no disc in the recorder. - Insert an MD. NO SIGNAL The recorder could not detect digital input signals. - Make sure that the source is connected firmly (page 15). P/B ONLY You tried to record or edit on a premastered MD (P/B stands for "playback"). - Insert a recordable MD. PROTECTED You tried to record or edit on a MD with the tab in the recordprotect position. - Slide the tab back (page 62). 70