Sony NEX-VG30 "Handycam" Handbook - Page 21
If dust or debris adheres on the image sensor, Mount Adaptor, Functions, LA-EA1, Autofocus, AF system
View all Sony NEX-VG30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
If dust or debris adheres on the image sensor Turn off the camcorder and detach the lens. Clean the image sensor and the surrounding area using a blower (sold separately), and then reattach the lens. Table of Contents Search image Notes Do not use a spray blower because it may scatter water droplets inside the camcorder body. Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not touch the image sensor. Hold the camcorder's face downward to prevent the dust from resettling in the camcorder. Do not apply a mechanical shock to the camcorder during cleaning. If you cannot clean the image sensor by the above procedure, consult your Sony dealer or local authorized Sony service facility. Mount Adaptor Using a Mount Adaptor (sold separately), you can attach an A-mount lens (sold separately) to your camera. For details, refer to the operating instructions supplied with the Mount Adaptor. The available functions differ depending on the Mount Adaptor type. Functions Autofocus AF system AF/MF Select LA-EA1 Available with SAM/ SSM lens only* Contrast AF Switchable on the lens Autofocus Mode (Only Single photo mode) LA-EA2 Available Phase-detection AF SAM/SSM lenses: switchable on the lens Other lenses: switchable on the FOCUS button Single/Continuous US 21 Index