Sony NSX-40GT1 Reference Guide - Page 7

Attaching the Table-Top Stand Refer to the supplied Table-Top Stand leaflet for proper attachment. 1 Gently slide the TV onto the Table-Top Stand and align the screw holes. NSX-24GT1 2 Use the supplied screws to attach the TV to the Table-Top Stand. NSX-24GT1 NSX-32GT1 Detaching the Table-Top Stand from the TV Remove only the screws marked with on the TV. NSX-24GT1 NSX-32GT1 NSX-40GT1/NSX-46GT1 NSX-32GT1 NSX-40GT1/NSX-46GT1 • If you use an electric screwdriver, set the tightening torque at approximately 1.5 N·m {15 kgf·cm}. 3 After all the screws are tightened, cover the Table-Top Stand with the supplied Cable cover. NSX-40GT1/NSX-46GT1 • Do not put stress on the LCD panel or the frame around the screen. • Be careful to not pinch your hands or the AC power cord when you install the TV to the Table-Top Stand. • Remove the Cable cover prior to detaching the Table-Top Stand. • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When installing the TV on a wall, remove the screws from the rear of the TV. (They are fastened in the screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from children. 7