Sony PC120BT Operating Instructions - Page 16
Step 2, Setting the date and time
UPC - 027242595996
View all Sony PC120BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 2 Setting the date and time Set the date and time settings when you use your camcorder for the first time. "CLOCK SET" will be displayed each time that you set the POWER switch to CAMERA or MEMORY unless you set the date and time settings. If you do not use your camcorder for about three months, the date and time settings may be released (bars may appear) because the built-in rechargeable battery installed in your camcorder will have been discharged (p. 174). Set the area, the daylight saving time, year, month, day, hour and then the minute, in that order. (1) Set the POWER switch to CAMERA or MEMORY, then press MENU to display the menu settings. (2) Press v/V on the control button to select , then press z or B. (3) Press v/V on the control button to select CLOCK SET, then press zor B. (4) Press v/V on the control button to adjust the desired area (where you are), then press z. (5) Press v/V on the control button to select whether or not the time is daylight saving time, then press z. Select OFF if the time is not daylight saving time. Select ON if it is. (6) Press v/V on the control button to adjust the desired year, then press z. The year changes as follows: 1995 T t 2001 T t 2079 (7) Set the month, day and hour by pressing v/V on the control button and pressing z. (8) Set the minute by pressing v/V on the control button and pressing z by the time signal. The clock starts to move. (9) Press MENU to make the menu settings disappear. 16