Sony PEG N610C Operating Instructions - Page 214
I cannot perform an IR HotSync operation., Check the following on your CLIE handheld
UPC - 027242591981
View all Sony PEG N610C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Troubleshooting - Frequently Asked Questions , Confirm that the Speed setting in the Setup dialog box works for your modem. If you have problems using the "As Fast As Possible" option or a specific speed, try using a slower speed. , Make sure that your modem resets before you try again. (Turn off your modem, wait a minute, then turn it on.) , Confirm that the telephone cable is securely attached to your modem. , Make sure that the dialing instruction dials the correct phone number. , If you need to dial an outside line prefix, make sure you selected the Dial Prefix option on your CLIE handheld and have entered the correct code. Check the following on your CLIE handheld: , If the telephone line you are using has Call Waiting, make sure you selected the Disable call waiting option under "Modem Sync Phone Setup" on your CLIE handheld and entered the correct code. , Make sure that the telephone line you are using is not noisy. This can interrupt communications. , Check the batteries in your modem and replace them if necessary. I cannot perform an IR HotSync operation. , Make sure that the HotSync Manager is running and the Serial Port for local operations is set to the simulated port for infrared communication. , On your CLIE handheld, make sure that the HotSync application is set to IR to a PC/Handheld. , Make sure that the IR port of your CLIE handheld is aligned directly opposite to, and within a few inches of, the infrared device of your computer. Continued on next page Chapter6 Additional information 214