Sony PEG-NX60 CLIE Handbook (primary manual) - Page 74
Adding telephone settings
View all Sony PEG-NX60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Changing the Network preferences Adding telephone settings When you select the Phone field, your CLIÉ handheld opens a dialog box in which you define the telephone number you use to connect with your ISP or dial-in server. In addition, you can also define a prefix, disable Call Waiting, and give special instructions for using a calling card. Note The Phone Setup dialog box works correctly for AT&T and Sprint longdistance services. However, because MCI works differently, MCI customers need to put the calling card number in the Phone # field and the phone number in the Use calling card field. 1 On the Network Preferences screen, tap the Phone field. The Phone Setup screen is displayed. 2 Enter the phone number for your ISP or dial-in server in the Phone # field. 3 Change the following settings if necessary: 1 Enter the telephone number used to access the modem. If necessary, enter a dial prefix (such as "9") to access an outside line, and tap the Dial prefix check box. You can enter a comma in the field to introduce a "pause" in the dialing sequence. Each comma equals a two second pause. 2 If the phone line you are using for your CLIÉ handheld has Call Waiting, select the Disable call waiting check box to avoid an interruption during a modem HotSync® operation. Note Each telephone company assigns a code to disable Call Waiting. Contact your local telephone company for the code that is appropriate for you. Customizing your Sony CLIÉ Handheld (Preferences) Continued on next page 74