Sony PEG-T615C CLIE Remote Commander v1.0 Operating Instructions
Sony PEG-T615C - Personal Entertainment Organizer Manual
 |
UPC - 027242598119
View all Sony PEG-T615C manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony PEG-T615C manual content summary:
- Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 1
A-BOM-100-12(1) CLIÉ Remote Commander Version 1.0 Operating Instructions © 2001 Sony Corporation - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 2
to continued efforts to improve quality, the software specifications may be changed without notice. Program © 2001 Sony Corporation Documentation © 2001 Sony Corporation Sony and Jog Dial are trademarks of Sony Corporation. Graffiti, HotSync, and Palm OS are registered trademarks, and the HotSync - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 3
the CLIÉ Remote Commander 4 Installing 5 Preparing the CLIÉ Remote Commander for your use 6 Assigning devices to the CLIÉ Remote Commander 6 Assigning operations to the application buttons and Jog Dial navigator 9 Using the CLIÉ handheld as a remote commander 11 Remote-controlling a device - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 4
you can do with the CLIÉ Remote Commander The CLIÉ Remote Commander is an application you can install on your CLIÉ handheld to enable the CLIÉ handheld to function as a remote commander. A single remote control for multiple devices You can control a variety of remote-controlled devices (e.g. TV, VCR - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 5
can install the CLIÉ Remote Commander application via your computer's hard disk. Before installation, be sure to have the Palm Desktop for CLIÉ software installed on your computer, and have the CLIÉ handheld seated correctly in the cradle. 1 Double-click the Palm Desktop for CLIÉ icon on the Windows - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 6
CLIÉ Remote Commander Note To check whether the manufacturer of your remote-controlled device is supported by the CLIÉ Remote Commander application Chapter 4 The CLIÉ Remote Commander application starts and a list of the preassigned device is displayed. 2 Tap New. The New Entry screen is displayed. - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 7
of the CLIÉ handheld toward the device you want to remote-control and tap Test (power on/off). If the device does not respond to the CLIÉ Remote Commander, select a is listed on the supported manufacturer list on page 14, some devices cannot be remote-controlled depending on its model or the - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 8
screen of the device of which you want to change the remote control settings. 2 Tap Detail from the Options menu. The Detail screen appears. 3 Make changes as necessary and tap OK. The CLIÉ RMC dialog box appears. 4 Tap OK. The new remote control setting is set, and the control screen for the - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 9
Dial™ navigator to select CLIÉ RMC and then press the Jog Dial navigator. Or, tap the CLIÉ RMC icon on the Application Launcher screen. CLIÉ Remote Commander starts and the control screen of the last used device is displayed. 2 Tap Menu . 3 Tap Key Assignment from the Options menu. The Key - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 10
assignable button (e.g. JOG Up). The Key Assignment dialog box for each button appears. 6 Tap the arrow V next to Entry, and select the name of the remote control setting you wish to assign to the key. 7 Tap the arrow V next to Function, and select the operation you want to assign to that - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 11
or to the application buttons, see page 9. Notes • Be sure to point the IR port of your CLIÉ handheld toward the device that you wish to remote-control. • The reach of the remote-control signal is approximately 5 meters, but it may vary depending on the receiving device or on the environment - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 12
Chapter 4 Using the CLIÉ handheld as a remote commander Operating devices directly with the Jog Dial navigator or the application button Follow the steps below to perform the assigned operation from the Jog Dial navigator or the application buttons. 1 Start CLIÉ Remote Commander. 2 Use the Jog Dial - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 13
tap the MENU icon. This section describes the menu commands specific to the CLIÉ Remote Commander application. For the Edit menu, see "Using the edit menu" in the Operating Instructions manual. Options menu Detail Shows the remote control setting for the displayed control screen. Key Assignment The - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 14
Chapter 4 Appendix Manufacturing companies supported by the CLIÉ Remote Commander application Note Some devices cannot be remote-controlled depending on its model or the year of its production. TV Sony, Akai, Emerson, General Electric, Hitachi, JVC, Magnavox, Mitsubishi/MGA, NEC, Panasonic, Philips - Sony PEG-T615C | CLIE Remote Commander v1.0 Operating Instructions - Page 15
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
© 2001 Sony Corporation
CLIÉ Remote
Commander
Version 1.0
Operating Instructions
A-BOM-100-
12
(1)