Sony PEG-T615C CLIE Remote Commander v1.0 Operating Instructions - Page 11

Chapter 4 Using the CLIÉ handheld as a remote commander You can operate a remote-controlled device on the device's control screen. For those operations you have assigned to the Jog Dial™ navigator or to the application buttons, see page 9. Notes • Be sure to point the IR port of your CLIÉ handheld toward the device that you wish to remote-control. • The reach of the remote-control signal is approximately 5 meters, but it may vary depending on the receiving device or on the environment. Remote-controlling a device Operating a device from the control screen 1 On the Application Launcher screen, rotate the Jog Dial™ navigator to select CLIÉ RMC and press the Jog Dial navigator. Or, tap the CLIÉ RMC icon on the Application Launcher screen. CLIÉ Remote Commander application starts and control screen for the last used device appears. Note If the setting for the last used device has been deleted, the Select Control screen appears. 2 Perform either of the following to switch to the control screen of the device you are about to remote-control. • For devices assigned to a quick-start button: Tap the quick-start button to which it is assigned. • For devices unassigned to a quick-start button: Tap Select, then tap to select the name of the remote control setting from the list. The control screen for the selected device appears. 3 Tap the on-screen buttons to remote-control the device. 11