Sony RDP-XA700iPN Operating Instructions - Page 27
AUDIO IN, Remote control, Buttons such
View all Sony RDP-XA700iPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Audio content automatically changed/ started/stopped. • When the unit is turned on or in the network standby mode, it is under the control of an "AirPlay" device. If you want to reject requests from the "AirPlay" device, turn the unit to the standby mode by pressing and holding ?/1 button until the color of the ?/1 indicator changes. There is no sound. • Check that no other iPad/iPhone/iPod touch is set on this unit. If so, remove it from the network. • If the problem persists, reboot your iPad/ iPhone/iPod touch or iTunes. The sound is too loud. • Loud sound may output from the unit if you set the volume too high via the iPhone, iPod touch, iPad or iTunes. The sound skips. • The sound may skip depending on factors such as the network environment in which you use the Wi-Fi network. • Wi-Fi networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the unit away from these devices. • The bandwidth of your Wi-Fi network may be too low. Move the unit and the wireless LAN router/access point closer to each other, without any obstacles between them. This unit cannot be operated. • Update the software version of the iPhone, iPod touch or iPad to the latest version. • Update the software version of the unit to the latest version (page 19). • Make sure another device is not streaming to the "AirPlay" compatible device at the same time. Buttons such as . and > do not work. • Make sure that the settings that allow iTunes to accept control from this unit are active. • The unit is not selected as the remote speaker on the iPhone, iPod touch, iPad or iTunes. Select the unit as the network speaker. It takes time for the "AirPlay" function to start. • Use this unit in the network standby mode (page 6). This mode shortens the startup time when using the "AirPlay" function, but increases standby power consumption. AUDIO IN There is no sound. • Make sure the audio connecting cable (not supplied) is connected firmly. • Make sure the AUDIO IN function is selected. The sound is low. • Confirm the volume of the connected external component. • Confirm the volume level on the unit. Remote control The remote control does not function. • Replace the battery in the remote control with a new one if it is weak. • Make sure that you are pointing the remote control at the remote sensor on the unit. • Remove any obstacles in the path of the remote control and the unit. • Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. • Move closer to the unit when using the remote control. 23US