Sony RDP-XA900iP Operating Instructions - Page 29
Bluetooth, Buttons such - airplay speaker
View all Sony RDP-XA900iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
• If the problem persists, reboot your iPod touch/iPhone/iPad or iTunes. The sound is too loud. • Loud sound may output from the unit if you set the volume too high via the iPod touch, iPhone, iPad or iTunes. The sound is low. • The volume level of the iPod touch, iPhone, iPad or iTunes might not link with the volume level of this unit. Adjust the volume by pressing the VOLUME +/- button of the unit or remote control. The sound skips. • The sound may skip depending on factors such as the network environment in which you use the Wi-Fi network. • Wi-Fi networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the unit away from these devices. • The bandwidth of your Wi-Fi network may be too low. Move the unit and the wireless LAN router/access point closer to each other, without any obstacles between them. This unit cannot be operated. • Update the software version of the iPod touch, iPhone or iPad to the latest version. • Update the software version of the unit to the latest version (page 21). • Make sure another device is not streaming to the "AirPlay" compatible device at the same time. Buttons such as . and > do not work. • Make sure that the settings that allow iTunes to accept control from this unit are active. • The unit is not selected as the remote speaker on the iPod touch, iPhone, iPad or iTunes. Select the unit as the network speaker. It takes time for the "AirPlay" function to start. • Use this unit in the network standby mode (page 7). This mode shortens the startup time when using the "AirPlay" function, but increases standby power consumption. Bluetooth There is no sound. • Make sure this unit is not too far from the Bluetooth device, or this unit is not receiving interference from a Wi-Fi network, other 2.4 GHz wireless device, or microwave oven. • Check that the Bluetooth connection is made properly between this unit and the Bluetooth device. • Pair this unit and the Bluetooth device again. • Keep the unit away from metal objects or surfaces. • Make sure the unit is in the Bluetooth mode. Otherwise, press the BLUETOOTH button. Sound skips or the correspondence distance is short. • If a device that generates electromagnetic radiation, such as a Wi-Fi network, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources. • Remove any obstacle between this unit and Bluetooth device, or move away from the obstacle. • Locate this unit and Bluetooth device as near as possible. • Re-position this unit. • Re-position the Bluetooth device. Connecting cannot be done. • Perform pairing again (page 19). Pairing cannot be done. • Bring this unit and the Bluetooth device closer together. 25US