Sony RDP-XA900iP Operating Instructions - Page 30
AUDIO IN, VIDEO OUT, Remote control, The remote control does not function.
View all Sony RDP-XA900iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
• Delete the unit from your Bluetooth device and perform pairing again (page 19). AUDIO IN There is no sound. • Make sure the audio connecting cable (not supplied) is connected firmly. • Make sure the AUDIO IN function is selected. • If each terminal is connected to a different component, and both are playing back, the unit will output sound from the component connected to the DIGITAL (OPT) terminal. • The DIGITAL (OPT) terminal supports linear PCM signal only. You may need to change the sound setting of the connected component. The sound is low. • Confirm the volume of the connected external component. • Confirm the volume level on the unit. Remote control The remote control does not function. • Replace the battery in the remote control with a new one if it is weak. • Make sure that you are pointing the remote control at the remote sensor on the unit. • Remove any obstacles in the path of the remote control and the unit. • Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. • Move closer to the unit when using the remote control. VIDEO OUT Videos are not displayed on "iPod" screen. • Remove the iPod, then remove the composite video cable (not supplied). Then, set the iPod on the Docking Tray again. • Check the video settings of the iPod. Videos are not displayed on a monitor. • Remove and reconnect the iPod from/to the unit that is connected to the monitor. 26US