Sony RDR-GX330 Operating Instructions - Page 77

Audio DRC Dynamic Range Control, DVDs only, Downmix DVDs only, Settings and Adjustments

Page 77 highlights

Settings and Adjustments 4 Set the digital output signal. • Dolby Digital (DVDs only) Selects the type of Dolby Digital signal. D-PCM Select this when the recorder is connected to an audio component lacking a built-in Dolby Digital decoder. The surround effects of output signals are determined by the "Downmix" setting item in the "Audio" setup. Dolby Digital Select this when the recorder is connected to an audio component with a built-in Dolby Digital decoder. • DTS (DVD VIDEOs only) Selects whether or not to output DTS signals. On Select this when the recorder is connected to an audio component with a built-in DTS decoder. Off Select this when the recorder is connected to an audio component without a built-in DTS decoder. • 48kHz/96kHz PCM (DVD VIDEOs only) Selects the sampling frequency of the audio signal. 48kHz/ 16bit The audio signals of DVD VIDEOs are converted to 48 kHz/16 bit and output. 96kHz/ 24bit All signals containing 96 kHz/24 bit are output without conversion. However, the signals are output at 48 kHz/16 bit if copyright-protected signals are contained. Audio DRC (Dynamic Range Control) (DVDs only) Selects the dynamic range (difference between soft and loud sounds) setting when playing a DVD that conforms to Audio DRC. This affects the output from the following jacks: - LINE OUT R-AUDIO-L jacks - DIGITAL OUT (COAXIAL) jack only when "Dolby Digital" is set to "D-PCM" (page 76). Standard Normally select this position. TV Mode Makes low sounds clear even if you turn the volume down. Wide Range Gives you the feeling of being at a live performance. Downmix (DVDs only) Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see "4. Displaying the Playing/Remaining Time and Play Information" on page 30. This function affects the output of the following jacks: - LINE OUT R-AUDIO-L jacks - DIGITAL OUT (COAXIAL) jack when "Dolby Digital" is set to "D-PCM" (page 76). Dolby Surround Normally select this position. Multi-channel audio signals are output to two channels for enjoying surround sounds. Normal Multi-channel audio signals are downmixed to two channels for use with your stereo. b Note "48kHz/96kHz PCM" setting has no effect when audio signals are output from the LINE OUT (RAUDIO-L) jacks. If the sampling frequency is 96kHz, signals are simply converted to analog signals and output. 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

77
Settings and Adjustments
4
Set the digital output signal.
• Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
• DTS (DVD VIDEOs only)
Selects whether or not to output DTS signals.
• 48kHz/96kHz PCM (DVD VIDEOs only)
Selects the sampling frequency of the audio
signal.
b
Note
“48kHz/96kHz PCM” setting has no effect when
audio signals are output from the LINE OUT (R-
AUDIO-L) jacks. If the sampling frequency is
96kHz, signals are simply converted to analog
signals and output.
Audio DRC (Dynamic Range Control)
(DVDs only)
Selects the dynamic range (difference
between soft and loud sounds) setting when
playing a DVD that conforms to Audio DRC.
This affects the output from the following
jacks:
– LINE OUT R-AUDIO-L jacks
– DIGITAL OUT (COAXIAL) jack only
when “Dolby Digital” is set to “D-PCM”
(page 76).
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “4. Displaying
the Playing/Remaining Time and Play
Information” on page 30. This function
affects the output of the following jacks:
– LINE OUT R-AUDIO-L jacks
– DIGITAL OUT (COAXIAL) jack when
“Dolby Digital” is set to “D-PCM”
(page 76).
D-PCM
Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. The
surround effects of output
signals are determined by the
“Downmix” setting item in
the “Audio” setup.
Dolby
Digital
Select this when the recorder
is connected to an audio
component with a built-in
Dolby Digital decoder.
On
Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
Off
Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
48kHz/
16bit
The audio signals of DVD
VIDEOs are converted to 48
kHz/16 bit and output.
96kHz/
24bit
All signals containing
96 kHz/24 bit are output
without conversion.
However, the signals are
output at 48 kHz/16 bit if
copyright-protected signals
are contained.
Standard
Normally select this position.
TV Mode
Makes low sounds clear even
if you turn the volume down.
Wide
Range
Gives you the feeling of
being at a live performance.
Dolby
Surround
Normally select this position.
Multi-channel audio signals
are output to two channels for
enjoying surround sounds.
Normal
Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.