Sony RM-VLZ620 Operating Instructions

Sony RM-VLZ620 - Integrated Remote Commander Manual

Get Sony RM-VLZ620 - Integrated Remote Commander PDF manuals and user guides
UPC - 027242780095
View all Sony RM-VLZ620 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony RM-VLZ620 manual content summary:

  • Sony RM-VLZ620 | Operating Instructions - Page 1
    4-170-639-12 (1) Integrated Remote Commander Operating Instructions RM-VLZ620 © 2010 Sony Corporation
  • Sony RM-VLZ620 | Operating Instructions - Page 2
    and used in accordance with the instructions, may cause harmful interference to radio manual could void your authority to operate this equipment. IMPORTANT Be sure to place the remote control out of the reach of small children or pets, and lock the controls using the Hold function (page 31). Devices
  • Sony RM-VLZ620 | Operating Instructions - Page 3
    preset at the factory to operate any Sony device. You can also control non-Sony devices (page 12). The RM-VLZ620 can be used to operate major manufacturer's A/V devices by setting the manufacturer's code. You can control up to eight devices. The RM-VLZ620 can control devices assigned to any of the
  • Sony RM-VLZ620 | Operating Instructions - Page 4
    RM-VLZ620 For a Sony Device For a Non-Sony Device Turn on your device by the Device Select button (page 10). ©2010 Sony Corporation Printed in China Set the manufacturer's code (page 12). TV / Téléviseur / TV / TV Sony TV Brand A.R. Systems Code Barco 00556 Operate your device with the
  • Sony RM-VLZ620 | Operating Instructions - Page 5
    Advanced Features Teach signals (page 20). If the Manufacturer's code cannot be found Program a consecutive procedure (page 28). For more convenient features 
  • Sony RM-VLZ620 | Operating Instructions - Page 6
    the manufacturer's code you have set 16 Adjusting the Volume 17 Controlling volume via an amplifier 18 Teaching the RM-VLZ620 New Functions (Learning Function 20 Teaching the Device Select or SYSTEM CONTROL buttons 24 Additional Features Assigning a Channel to Each Number Button 27 Programming
  • Sony RM-VLZ620 | Operating Instructions - Page 7
    player/recorder 38 BD button 39 Blu-ray Disc/HD-DVD player 39 CBL (SAT) button 40 Cable set top box 40 Satellite receiver 40 DVR (PVR) button 41 Digital video recorder/personal video recorder 41 VCR button 42 VCR...42 CD button 43 CD player...43 Cassette deck...43 AMP
  • Sony RM-VLZ620 | Operating Instructions - Page 8
    LR6) alkaline batteries will last up to one year. If the RM-VLZ620 does not operate properly, the batteries might be drained. If this happens, replace RMVLZ620 for a long period of time. Note Even if you replace the batteries, your manufacturer's code settings or learned/ programmed remote signals
  • Sony RM-VLZ620 | Operating Instructions - Page 9
    shows how the RMVLZ620 generally operates for each device in the factory preset mode. 1 SET indicator Lights or flashes during settings. 2 SET button 3 Device Select buttons Light with the button press to indicate the current device mode. 4 Player Control buttons 5 A, B, C, D buttons 6 GUIDE button
  • Sony RM-VLZ620 | Operating Instructions - Page 10
    to the RM-VLZ620 (page 20).  To control other Sony devices that are not preset at the factory, set the manufacturer's code for the device (page 12).  Some devices that do not support infrared signals will not work with the RM-VLZ620. Device Select buttons Example: To operate a Sony DVD player
  • Sony RM-VLZ620 | Operating Instructions - Page 11
    To clear automatic power-on control for a Sony device SET/SET indicator Device Select buttons 1 Press and hold SET for more than 3 seconds. While keeping SET held down, press , then release both buttons. The SET indicator lights up. 2
  • Sony RM-VLZ620 | Operating Instructions - Page 12
    . To activate the control, clear the learned signal or programmed consecutive procedure from the Device Select button. Setting the Manufacturer's Code for Non-Sony Devices You can use the RM-VLZ620 for major brand A/V devices. To use with nonSony A/V devices, or Sony devices that are not preset
  • Sony RM-VLZ620 | Operating Instructions - Page 13
    Controlling Devices Setting the manufacturer's code SET/SET indicator Device Select buttons Device TV CBL DVR DVD BD VCR CD AMP Manufacturer's code (01454) Note If you cannot find the manufacturer's code, use the Search function (page 15). 2 Press and hold SET for more than 3 seconds. The SET
  • Sony RM-VLZ620 | Operating Instructions - Page 14
    's code (if listed for your device).  Try setting the code number using the Search function (page 15).  The remote control signals may be different for some devices or functions. In this case, teach the remote control appropriate signals to the RM-VLZ620 (page 20). To clear a manufacturer's code
  • Sony RM-VLZ620 | Operating Instructions - Page 15
    Controlling Devices Searching for the Manufacturer's Code for Non-Sony Devices If you cannot find the manufacturer's code in the supplied "Manufacturer's Code List," set the code using the Search function. Note If no operations are performed for 10 seconds while setting, the setting will be
  • Sony RM-VLZ620 | Operating Instructions - Page 16
    indicators turn off.  If you still cannot operate the device, even after setting the manufacturer's code using the Search function, another code may be available. Repeat the above steps to search for another code that works for most functions of your device. While keeping SET held down, press the
  • Sony RM-VLZ620 | Operating Instructions - Page 17
    factory setting for each Device Select button is as follows. Device Select button TV, CBL, DVR, DVD, BD, VCR CD, AMP Controls the volume of TV Amplifier Notes  It is recommended that you first set the TV and AMP manufacturer's code before setting up any other devices.  When a projector or DVD
  • Sony RM-VLZ620 | Operating Instructions - Page 18
    from video to audio each time. To change the factory preset of the volume control SET/SET indicator Device Select buttons Example: To set the DVD Device Select button to control the volume via the amplifier 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping
  • Sony RM-VLZ620 | Operating Instructions - Page 19
    turn off. 3 flashes To cancel the process Press SET anytime. To reset the volume control 1 Press and hold SET for more than 3 seconds. The SET indicator lights up. While keeping SET held down, press the Device Select button you want to reset. 2 Enter 9 - 5 - 5. The SET indicator flashes three times
  • Sony RM-VLZ620 | Operating Instructions - Page 20
    Teaching the RMVLZ620 New Functions (Learning Function) If you cannot control a device, even after correctly setting the manufacturer's code, you can teach the RM-VLZ620 new functions by using the original remote control supplied with the device. SET/SET indicator Device Select buttons You can
  • Sony RM-VLZ620 | Operating Instructions - Page 21
    , the SET indicator flashes once and the learning procedure returns to Step 4. 6 Press the button on the original remote control to transmit the signal to the RM-VLZ620. During signal transfer, only the SET indicator stays lit, and the Device Select button turns off. After signal transfer is
  • Sony RM-VLZ620 | Operating Instructions - Page 22
    the learned function will remain even after you set a manufacturer's code.  You cannot teach a simultaneous button operation (for example  + ) to the two buttons on the RM-VLZ620 at a time. In this case, teach the signal to a single button while pressing two buttons on the original remote control
  • Sony RM-VLZ620 | Operating Instructions - Page 23
    times to indicate that the setting mode has been entered. 3 flashes To clear all the learned functions under a specific device mode Example: To clear all learned functions under DVD mode 3 Press the desired Device Select button. 1 Press and hold SET for more than 3 seconds. While keeping SET held
  • Sony RM-VLZ620 | Operating Instructions - Page 24
    automatically switched to DVD simply by pressing the DVD Device Select button. (For this operation, the amplifier should first be turned on.) Notes  Use new batteries in both remote control units.  If a consecutive procedure has been programmed to the button (page 28), the setting procedure will
  • Sony RM-VLZ620 | Operating Instructions - Page 25
    to teach for more than 3 seconds. 1 Place the RM-VLZ620 head to head with your device's remote control. Remote control for your device The selected Device Select button lights up. RM-VLZ620 About 3 - 8 cm (1 - 3 in.) away Note If you do not perform learning steps within 10 seconds at any point
  • Sony RM-VLZ620 | Operating Instructions - Page 26
    down, press . 2 Enter 9 - 0 - 4. The SET indicator flashes three times. 3 Press and hold the Device Select button for more than 3 seconds, or press the SYSTEM CONTROL button you want to reset. When the learned function is cleared, the SET indicator flashes three times. 4 Press SET to finish setting
  • Sony RM-VLZ620 | Operating Instructions - Page 27
    has already been set on a button, it will be overwritten with the new one.  If the button has already learned a function, you cannot assign a channel.  Once a number button has been programmed, it cannot function as a regular number button. 1 Press and hold SET for more than 3 seconds. The SET
  • Sony RM-VLZ620 | Operating Instructions - Page 28
    up to 16 consecutive steps to each of the SYSTEM CONTROL buttons (1 - 4) or the Device Select buttons. To perform the programmed procedure: - Press the programmed SYSTEM CONTROL button. - Press and hold the programmed Device Select button for more than 2 seconds*. * If you release the button within
  • Sony RM-VLZ620 | Operating Instructions - Page 29
    three times to indicate that the setting mode has been entered. 3 flashes 9, 8, 1 3 Press a SYSTEM CONTROL button or Device Select button you want to program. SYSTEM CONTROL buttons 4 Program a consecutive procedure. With this example, press the buttons in sequence as below*: 1 Press and hold
  • Sony RM-VLZ620 | Operating Instructions - Page 30
    the POWER button for Sony devices by using automatic power-on control instead.  If you have programmed an incorrect operation by mistake, the setting is canceled. Start from the beginning.  If you press a Device Select button in a consecutive procedure, the function already learned on the button
  • Sony RM-VLZ620 | Operating Instructions - Page 31
    Additional Features Locking the Controls (Hold Function) 1 Press and hold SET for more than 3 seconds. To prevent accidental operation, you can lock all the buttons with the Hold function. It is recommended to use this function to prevent children from misoperating devices such as air
  • Sony RM-VLZ620 | Operating Instructions - Page 32
    Restoring the Factory Settings You can clear all the settings (manufacturer's codes, learned functions, and programmed consecutive procedures), and reset the RM-VLZ620 to its factory settings. If you want to clear the settings for any Device Select button, see page 14. SET/SET indicator 1 Press and
  • Sony RM-VLZ620 | Operating Instructions - Page 33
    remote control operations.  Place the remote control out of the reach of small children or pets. Devices Operating distance Approx. 11 m (36 ft) (varies depending on devices of different manufacturers oz) (not including batteries) Design and specifications are subject to change without notice.
  • Sony RM-VLZ620 | Operating Instructions - Page 34
    you have set the manufacturer's code, then teach the RM-VLZ620 new functions by using the original remote control supplied with the device (page 20).  The device may be operated with a manufacturer's code that is not listed in the "Manufacturer's Code List." Set a manufacturer's code again with the
  • Sony RM-VLZ620 | Operating Instructions - Page 35
    Other Information Symptom Remedy The RM-VLZ620 failed to learn the signals of the remote control supplied with the device. You cannot operate the device even after teaching the RM-VLZ620. After programming the power-on signal of the device, pressing that Device Select button does not function
  • Sony RM-VLZ620 | Operating Instructions - Page 36
    that cannot be operated with RM-VLZ620.  To use the original device setting, set the manufacturer's code again (page 12).  If you enter a new brand's manufacturer's code without clearing the previous learned functions on that Device Select button, the previously learned functions remain effective
  • Sony RM-VLZ620 | Operating Instructions - Page 37
    of Preset Functions TV button The buttons operate as below in the factory preset mode. TV KEY DISPLAY          A  B  C  D  GUIDE LIST  RETURN  MENU  VOL Red button Green button Yellow button Blue button Displays the program guide (EPG). Moves the cursor to select a menu item.
  • Sony RM-VLZ620 | Operating Instructions - Page 38
    DVD button The buttons operate as below in the factory preset mode. DVD player/recorder KEY DISPLAY     A  B  C  D  GUIDE LIST  RETURN  MENU  Displays the program guide (EPG). Moves the cursor to select a menu item. Enters the selected item. Displays the Title List. Returns
  • Sony RM-VLZ620 | Operating Instructions - Page 39
    BD button The buttons operate as below in the factory preset mode. Blu-ray Disc/HD-DVD player KEY DISPLAY     A  B  C  D  GUIDE RETURN  MENU  INPUT . AUDIO Changes the sound. CLEAR Clears the setting. Displays the program guide (EPG). Moves the cursor to select a menu item. Enters
  • Sony RM-VLZ620 | Operating Instructions - Page 40
    SAT) button The buttons operate as below in the factory preset mode. Cable set top box KEY DISPLAY       A/B/C  D  GUIDE   LIST  RETURN  MENU on and off. Page up/down Enables the Favorite function. Displays program information. Displays the options menu. KEY DISPLAY  RECALL  CH
  • Sony RM-VLZ620 | Operating Instructions - Page 41
    FUNCTION Enables the Favorite function. Displays program information. Displays the Satellite dish menu/Station Index. Tunes to the last tuned station. Switches the channel up/ down. Enables the Sleep function (when available). DVR (PVR) button The buttons operate as below in the factory preset
  • Sony RM-VLZ620 | Operating Instructions - Page 42
    the Sleep function (when available). Enters the selected item. * These buttons correspond to TiVo service or the Replay service. Refer to its instruction manual for details. VCR button The buttons operate as below in the factory preset mode. VCR KEY DISPLAY   INPUT  1 - 9, 0  TV  POWER
  • Sony RM-VLZ620 | Operating Instructions - Page 43
    Table of Preset Functions CD button Cassette deck The buttons operate as below in the factory preset mode. CD player KEY DISPLAY the Sleep function (when available). Enters the setting. KEY DISPLAY A  D LIST  VOL +/-  INPUT  POWER  INFO  MUTING  SLEEP FUNCTION A of Sony device). 43
  • Sony RM-VLZ620 | Operating Instructions - Page 44
    AMP button DVD Home Theater The buttons operate as below in the factory preset mode. Amplifier/receiver KEY DISPLAY VOL +/-  when available). KEY DISPLAY A  B  C  D  GUIDE LIST  RETURN  MENU  VOL +/-  INPUT  1 - Clears the setting. Displays the program guide (EPG). Moves the cursor
  • Sony RM-VLZ620 | Operating Instructions - Page 45
    KEY DISPLAY  RECALL  MUTING  CH +/-  SLEEP  ENTER FUNCTION BAND Selects FM/AM. Mutes the volume. Press again to turn muting off. Presets or tunes frequency up/down. Enables the Sleep function (when available). Enters the selected item. Table of Preset Functions 45
  • Sony RM-VLZ620 | Operating Instructions - Page 46
    settings 32 S Searching Manufacturer's code for Non-Sony devices 15 Setting Manufacturer's code 13 Specifications 33 SYSTEM CONTROL buttons Programming a consecutive procedure 28 Teaching a new function 24 T Table of preset functions 36 Teaching a new function 20 Troubleshooting 34 V VOL buttons
  • Sony RM-VLZ620 | Operating Instructions - Page 47
    47
  • Sony RM-VLZ620 | Operating Instructions - Page 48
    for the manufacturer's code (page 15) 1 Turn on your device. 2 3 Aim the RM-VLZ620 at the device. Press SET for (e.g., TV) over 3 sec. 4 5 6 7 When the device turns off, release the button. Press and hold to start searching. Automatic power-on control (page 11) (Sony devices only) [To
  • Sony RM-VLZ620 | Operating Instructions - Page 49
    above, press the SYSTEM CONTROL button, or press the Device Select button for over 3 sec., then skip Step 4. [all the learned functions under a specific device mode] 1 2 3 Press SET for over 3 sec. (e.g., DVD) Assigning a channel to each number button (page 27) [e.g., assign to number button
  • Sony RM-VLZ620 | Operating Instructions - Page 50
  • Sony RM-VLZ620 | Operating Instructions - Page 51
  • Sony RM-VLZ620 | Operating Instructions - Page 52
    Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
4-170-639-
12
(1)
Integrated
Remote Commander
Operating Instructions
RM-VLZ620
© 2010 Sony Corporation