Sony SA-32SE1 Operating Instructions - Page 17
Specifications, If the unit still does not operate, properly after performing the, above measures
View all Sony SA-32SE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
OTHER The STANDBY indicator flashes. • Turn off the unit and unplug the AC power cord (mains lead) immediately. • Remove anything that is blocking the ventilation hole. If the unit still does not operate properly after performing the above measures, reset the unit as follows: Use the button on the unit for the operation. 1 Press ?/1 to turn on the unit. 2 Hold down ?/1 for 5 seconds. STANDBY indicator flashes 3 times and the unit is reset to the default settings. Specifications Amplifier section AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) (USA model only) L + R With 8 ohm loads, both channels driven, from 300 - 20,000 Hz; rated 14 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. POWER OUTPUT (reference) L / R 20 W (per channel at 8 ohms, 1 kHz) (China model only) POWER OUTPUT (rated) (Measured under MOVIE sound field) L + R 9.5 W + 9.5 W (at 8 ohms, 1 kHz, 1% THD) (Other models) POWER OUTPUT (rated) L + R 16 W + 16 W (at 8 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) L / R 20 W (per channel at 8 ohms, 1 kHz, 10% THD) Troubleshooting/Specifications continued 17GB