Sony SLV-D550P Operating Instructions - Page 66

4 Press B/b to select an item. 5 Press SET UP to exit the menu. Menu choices • Dolby Digital Selects the type of Dolby Digital signal. The default setting is indicated in bold print. D-PCM Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. Dolby Digital Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. • DTS Selects whether or not to output DTS signals. The default setting is indicated in bold print. Off Select this when the player is connected to an audio component lacking a built-in DTS decoder. On Select this when the player is connected to an audio component with a built-in DTS decoder. • Audio DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC." This affects the output from the following jacks: - LINE OUT AUDIO L/R jacks - DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby Digital" is set to "D-PCM". The default setting is indicated in bold print. Standard Normally select this positon. Wide Range Gives you the feeling of being at alive performance. Notes • If you select the surround setting while playing a DVD, the player does not output Dolby Digital signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set "Dolby Digital" to "D-PCM" in "AUDIO SETUP" menu). • If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. • Noise may occur in the LinearPCM double-speed audio. This is not a malfunction. • If you set "DTS" to "On," you cannot select surround setting (page 87). 66 Audio Setup