Home » Sony Manuals » Audio Components » Sony STR-DA2000ES » Manual Viewer

Sony STR-DA2000ES Operating Instructions (primary manual) - Page 2

Warning - manual

View all Sony STR-DA2000ES manuals

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away batteries with general house waste; dispose of them correctly as chemical waste. For customers in the United States This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669. The Number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade name: SONY Model No.: STR-DA2000ES Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell NJ 07649 U.S.A. Telephone No.: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For customer in Canada CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. Except for European model ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. 2GB

Section	Page
WARNING	2
For customers in the United States	2
CAUTION	2
Note to CATV system installer:	2
Regulatory Information	2
For customer in Canada	2
CAUTION	2
Except for European model	2
About This Manual	3
About area codes	3
Table of Contents	4
1: Check how to hookup your components	6
Connectable components	6
Required cords	7
A Audio cord	7
B Audio/video cord	7
C Video cord	7
D S-video cord	7
E Optical digital cord	7
F Coaxial digital cord	7
G Monaural audio cord	7
Tip	7
H Component video cord	7
Notes	7
If you have Sony components with CONTROL A1II/CONTROL S jacks	7
Hooking up a DVD player, TV monitor, or satellite tuner	8
Note	8
Note	9
Hooking up an MD/DAT deck	10
If you want to connect several digital components, but cannot find an unused input	10
Tips	10
Note	10
Tips	11
Notes	11
Note	12
Hooking up audio components	13
Note	13
Hooking up video components	14
2: Connecting the antennas	15
Notes	15
3: Connecting speakers	16
Example of 7.1 channel speaker system configuration	16
Tips	16
Required cords	17
A Speaker cords (not supplied)	17
B Monaural audio cord (not supplied)	17
STR-DA2000ES	17
Tip	17
4: Connecting the AC power cord	19
Notes	19
Performing initial setup operations	19
1 Press ?/1 on the receiver to turn off the receiver.	19
2 Hold down ?/1 on the receiver for 5 seconds.	19
3 While “ENTER to Clear” appears in the display, press ENTER on the receiver.	19
Note	19
5: Setting up the speakers	20
1 Press ?/1 to turn on the system.	20
2 Press MAIN MENU to select “SP. SET UP”.	20
3 Rotate MENU to select the menu item you want.	20
4 Rotate –/+ to select the parameter.	20
5 Repeat steps 3 and 4 until you have set all of the items that follow.	20
Speaker setup parameters	20
Tip	20
STR-DA2000ES	21
STR-DB2000	21
Tip	21
Tip	22
For advanced speaker setups	22
6: Adjusting the speaker levels and balance	23
Tip	23
1 Press ?/1 on the remote to turn on the receiver.	23
2 Press TEST TONE on the remote.	23
3 Adjust the speaker level and balance using the LEVEL menu so that the level of the test tone so...	23
4 Press TEST TONE again.	23
To output the test tone only from a specific speaker	23
For more precise adjustment	23
Selecting the component	24
1 Rotate INPUT SELECTOR to select the input.	24
2 Turn on the component and start playback.	24
3 Rotate MASTER VOLUME –/+ to adjust the volume.	24
To mute the sound	24
Notes on using headphones	24
Listening to multi channel sound	25
STR-DA2000ES	25
STR-DB2000	25
When a center speaker or sub woofer is not connected	25
Listening to FM/AM radio	25
Tip	25
Automatic tuning	25
1 Rotate INPUT SELECTOR to select “FM” or “AM”.	25
2 Press TUNING + or TUNING –.	25
In case of poor FM stereo reception	25
1 Press MAIN MENU to select “TUNER”.	25
2 Rotate MENU to select “FM MODE”.	25
3 Rotate –/+ to select “MONO”.	25
Direct tuning	26
1 STR-DA2000ES: Move the easy scroll key to select “TUNER”, then press the key repeatedly to sele...	26
2 Press ALT, then press D.TUNING on the remote.	26
3 Press the numeric buttons to enter the frequency.	26
If you cannot tune in a station and the entered numbers flash	26
Storing FM stations automatically	26
1 Press ?/1 to turn off the receiver.	26
2 Hold down MEMORY/ENTER and press ?/1 to turn the receiver back on.	26
Notes	26
Presetting radio stations	27
Presetting radio stations	27
1 Rotate INPUT SELECTOR to select “FM” or “AM”.	27
2 Tune in the station that you want to preset using Automatic Tuning (page25) or Direct Tuning (...	27
3 Press MEMORY/ENTER.	27
4 Press PRESET TUNING + or PRESET TUNING – to select a preset number.	27
5 Press MEMORY/ENTER again.	27
6 Repeat steps 2 to 5 to preset another station.	27
Tuning to preset stations	27
1 Rotate INPUT SELECTOR to select “FM” or “AM”.	27
2 Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want.	27
Using the remote	27
1 STR-DA2000ES: Move the easy scroll key to select “TUNER”, then press the key repeatedly to sele...	27
2 Press D.SKIP/CH/PRESET +/– repeatedly to select the preset station you want.	27
Using the Radio Data System (RDS)	28
Receiving RDS broadcasts	28
Note	28
Displaying RDS information	28
Notes	28
Description of program types	28
Changing the display	29
Changing the information in the display	29
All inputs except “FM” and “AM”	29
“FM” and “AM”	29
Displaying the input stream information	29
1 Press MAIN MENU to select “STREAM INFO”.	29
2 Rotate MENU.	29
3 Rotate –/+ for more information.	29
About the indications in the display	30
B SLEEP: Lights up when sleep timer is activated.	30
C SPA/SPB: Lights up in accordance with the speaker system being used (A or B). Turns off when he...	30
D MULTI CH IN 1/2: Lights up when “MULTI 1 DIRECT” or “MULTI 2 DIRECT” is selected.	30
E ; DIGITAL (EX): Lights up when Dolby Digital signals are input. “EX” lights up when Dolby Digit...	30
F ; PRO LOGIC (II): Lights up when the receiver applies Pro Logic processing to 2 channel signals...	30
G DTS (-ES): Lights up when DTS signals are input. “-ES” lights up when DTS-ES signals are input....	30
H 96/24: Lights up when the receiver is decoding DTS 96 kHz/24 bit signals.	30
I Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 2...	30
J MEMORY: Lights up when presetting stations, naming preset stations and inputs, etc.	30
K D.ASSIGN: Lights up when the digital assign function is used for the selected input.	30
L COAX: Lights up when the source signal is a digital signal being input through the COAXIAL term...	30
M OPT: Lights up when the source signal is a digital signal being input through the OPTICAL termi...	30
N NEO:6: Lights up when DTS Neo:6 Cinema/ Music decoding is activated. However, this indicator do...	30
O EQ: Lights up when the equalizer is activated.	30
P D.RANGE: Lights up when dynamic range compression is activated (page43).	30
Q Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played bac...	30
R L.F.E.: Lights up when the disc being played back contains the LFE (Low Frequency Effect) chann...	31
Using only the front speakers	32
Listening to 2 channel stereo sources (2CH STEREO)	32
Note	32
Enjoying higher fidelity sound	32
Decoding the input audio signal automatically	32
Tip	32
Enjoying stereo sound in multi channel (2 channel decoding mode)	33
If you connect a sub woofer	33
Selecting a sound field	33
Selecting a sound field for movies	33
About DCS (Digital Cinema Sound)	33
About CINEMA STUDIO EX modes	34
Tip	34
Notes	34
Selecting a sound field for music	34
When the headphones are connected	34
To turn off the surround effect	34
Listening to the sound without any adjustment	34
Selecting the surround back decoding mode	35
Tip	35
Note	35
How to select the surround back decoding mode	36
When you select “AUTO”	36
When you select “MATRIX”	36
When you select “OFF”	36
Note	36
Assigning the audio input	37
1 Press MAIN MENU to select “CUSTOMIZE”.	37
2 Rotate MENU to select “DIGITAL ASSIGN ?”.	37
3 Press MEMORY/ENTER.	37
4 Rotate MENU to select the digital audio input you want to assign.	37
5 Rotate –/+ to select the input you want to assign the digital audio input jack selected in step 4.	37
Selectable audio inputs for each input	37
Notes	37
Switching the audio input mode for digital components	38
1 Rotate INPUT SELECTOR to select the input.	38
2 Press INPUT MODE repeatedly to select the audio input mode.	38
Audio input modes	38
Notes	38
Customizing sound fields	38
Note on the displayed items	38
Adjusting the LEVEL menu	38
1 Start playing a source encoded with multi channel surround effects (DVD, etc.).	38
2 Press MAIN MENU to select “LEVEL”.	38
3 Rotate MENU to select the parameter.	38
4 While monitoring the sound, rotate –/+ to adjust the selected parameter.	38
5 Repeat steps 3 and 4 to adjust the other parameters.	38
LEVEL menu parameters	38
Note	39
For advanced LEVEL menu adjustments	39
Resetting sound fields to the initial settings	39
1 Press ?/1 to turn off the power.	39
2 While holding down MUSIC, press ?/1.	39
Adjusting the equalizer	40
1 Start playing a source encoded with multi channel surround effects (DVD, etc.).	40
2 Press MAIN MENU to select “EQUALIZER”.	40
3 Rotate MENU to select the parameter.	40
4 While monitoring the sound, rotate –/+ to adjust the selected parameter.	40
5 Repeat steps 3 and 4 to adjust the other items.	40
Note	40
EQUALIZER menu parameters	40
Advanced settings	40
Using the CUSTOMIZE menu to adjust the receiver	40
1 Press MAIN MENU to select “CUSTOMIZE”.	40
2 Rotate MENU to select the parameter.	40
3 Rotate –/+ to adjust the selected parameter.	40
4 Repeat steps 2 and 3 to adjust the other items.	40
CUSTOMIZE menu parameters	40
Notes	40
Note	41
x DC P.LINEARIZER (Phase Linearlizing)	41
Advanced SP. SET UP menu parameters	41
All SP. SET UP menu parameters	42
Tip	42
Advanced LEVEL menu parameters	43
All LEVEL menu parameters	43
Tip	43
Note	43
Custom install mode	44
1 Press MAIN MENU to select “CIS”.	44
2 Rotate MENU to select the parameter.	44
3 Rotate –/+ to select the setting you want.	44
4 Repeat steps 2 and 3 to adjust the other items.	44
CIS menu parameters	44
Tips	44
To set the 12V trigger setting for each input	44
1 Select “INPUT” in “12V TRIG”.	44
2 Press MEMORY/ENTER.	44
3 Rotate MENU to select the input.	44
4 Rotate –/+ to select “ON” to activate 12V trigger or select “OFF” to disactivate.	44
5 Press MEMORY/ENTER.	44
Naming preset stations and inputs	45
To index a preset station	45
1 Rotate INPUT SELECTOR to select “FM” or “AM”.	45
2 Tune in the preset station you want to create an index name for (page27).	45
3 Press MAIN MENU to select “TUNER”.	45
4 Rotate MENU to select “IN?”.	45
5 Press MEMORY/ENTER.	45
To index an input	45
1 Rotate INPUT SELECTOR to select an input you want to create an index name for.	45
2 Press MAIN MENU repeatedly to select “CUSTOMIZE”.	45
3 Rotate MENU to select “NAME?”.	45
4 Press MEMORY/ENTER.	45
To create an index name	45
1 Use MENU and –/+ to create an index name.	45
2 Press MEMORY/ENTER.	45
Note (Models of area code CEL only)	45
Using the Sleep Timer	46
Tip	46
Selecting the speaker system	46
The speaker system	46
Recording	47
Recording on an audio tape or MiniDisc	47
1 Select the component to be recorded.	47
2 Prepare the component for playing.	47
3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary.	47
4 Start recording on the recording deck, then start playback on the playback component.	47
Notes	47
Recording on a video tape	47
1 Select the program source to be recorded.	47
2 Prepare the component for playing.	47
3 Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording.	47
4 Start recording on the recording VCR, then start playing the video tape or laser disc you want ...	47
Tip	47
Notes	47
Listening to the sound in another zone	48
1 On the remote, press ?/1 while holding down USE MODE.	48
2 Press v/V on the remote to select “2ND”.	48
3 Turn on the main receiver (this receiver).	48
4 Press ?/1 on the remote.	48
5 Press one of the input buttons on the remote to select the source signals you want to output.	48
6 Turn on the amplifier in the 2nd zone and adjust the volume.	48
Tips	48
2nd zone connections	48
Main receiver	48
CONTROL A1II Control System	49
Note	49
CONTROL A1II and CONTROL A1 compatibility	49
Connections	49
Basic Functions	49
Note	49
Using CONTROL S Control System	50
(Models of area code U, CA only)	50
Precautions	51
On safety	51
On power sources	51
On heat buildup	51
On placement	51
On operation	51
On cleaning	51
Troubleshooting	52
Remote control	53
Error messages	54
Reference sections for clearing the memory	54
Specifications	55
AUDIO POWER SPECIFICATIONS	55
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (STR-DA2000ES models of area code U only)	55
1) Depending on the sound field settings and the source, there may be no sound output.	55
2) INPUT SHORT.	55
3) Weighted network, input level.	55
4) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn of...	56
List of button locations and reference pages	58
How to use this page	58
Main unit	58
To remove the cover	59

Match case Limit results 1 per page

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table-cloths, curtains, etc.

And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

Don’t throw away batteries with

general house waste; dispose of

them correctly as chemical waste.

For customers in the United States

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

CAUTION

You are cautioned that any changes or modification not

expressly approved in this manual could void your

authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

If you have any questions about this product, you may

call; Sony Customer Information Services Center

1-800-222-7669.

The Number below is for the FCC related matters only.

Regulatory Information

Declaration of Conformity

Trade name: SONY

Model No.: STR-DA2000ES

Responsible Party: Sony Electronics Inc.

Address: 680 Kinderkamack Road, Oradell NJ

07649 U.S.A.

Telephone No.: 201-930-6972

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

For customer in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK, DO NOT USE

THIS POLARIZED AC PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

Except for European model

ENERGY STAR® is a U.S. registered

mark. As an ENERGY STAR®

partner, Sony Corporation has

determined that this product meets the

ENERGY STAR® guidelines for

energy efficiency.

WARNING

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.