Sony STR-DE495 Operating Instructions - Page 22

Selecting the component (continued) PHONES Use to connect headphones. • When the headphones are connected, speaker output is automatically canceled and "SP" (STR-DE495 only) or "SP A" and "SP B" (STR-DE595 only) do not light up in the display. SPEAKERS (OFF/A/B/A+B) (STR-DE595 only) Press SPEAKERS (OFF/A/B/A+B) to output the sound from the speakers connected to the SPEAKERS FRONT terminals. Each time you press the button, the display will light up cyclically as follows: SP A t SP B t SP A and SP B t No display* To drive Speaker System A (Connected to the SPEAKERS FRONT A terminals) Speaker System B (Connected to the SPEAKERS FRONT B terminals) Both Speaker System A and B (Connected to the SPEAKERS FRONT A and B terminals) Select SP A (default setting) SP B SP A and SP B * If you do not want to drive Speaker System A and B, press SPEAKERS (OFF/A/B/A+B) until "SP A" and "SP B" do not light up in the display (no display). Changing the display DIMMER Press DIMMER repeatedly to adjust the brightness of the display (3 steps). However, when you press any button, the display becomes the brightest setting temporary. DISPLAY Each time you press DISPLAY, the display changes cyclically as follows: Index name of the component* t Selected component t Sound field applied to the program source When the tuner is selected Index name of the preset station* or program station name** t Frequency t Program type indication** t Radio text** t Current time** t Sound field applied to the band or the preset station * Index name appears only when you have assigned one to the component or preset station (page 34). Index name does not appear when only blank spaces have been entered, or it is the same as the input selector. ** During RDS reception only. (Models of area code CEL, CEK only. See page 32). 22GB