Sony STR DH500 Operating Instructions - Page 61

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Models of area code U, CA1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 90 W + 90 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 130 W/ch 1)Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz 2)Reference power output for front, center and surround speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog 10 Hz - 70 kHz +0.5/-2 dB (with sound field and tone bypassed) Inputs Analog Digital (Coaxial) Digital (Optical) Outputs (Analog) AUDIO OUT SUBWOOFER Tone Gain levels Sensitivity: 500 mV/ 50 kohms S/N3): 96 dB (A, 500 mV4)) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) S/N: 100 dB (A, 20 kHz LPF) Voltage: 500 mV/ 10 kohms Voltage: 2 V/1 kohm ±6 dB, 1 dB step 3)INPUT SHORT (with sound field and tone bypassed). 4)Weighted network, input level. FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step U, CA 530 kHz - 531 kHz - 1,710 kHz 1,710 kHz Antenna Loop antenna Intermediate frequency 450 kHz Video section Inputs/Outputs Video: 1 Vp-p/75 ohms COMPONENT VIDEO: Y: 1 Vp-p/75 ohms PB/CB: 0.7 Vp-p/75 ohms PR/CR: 0.7 Vp-p/75 ohms 80 MHz HD Pass Through Additional Information continued 61US