Sony STR-DN1040 Operating Instructions (Large File - 14.3 MB) - Page 130
NETWORK General, 3 W When Control for HDMI - media remote
View all Sony STR-DN1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
FLAC: 8 kHz - 192 kHz, 16 bit FLAC 44.1 kHz - 192 kHz, 24 bit FLAC * Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. Transfer speed High-speed Supported USB device Mass Storage Class Maximum current 500 mA NETWORK section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN Compatible standards: IEEE 802.11 b/g Security: WEP 64 bit, WEP 128 bit, WPA/ WPA2-PSK (AES), WPA/WPA2PSK (TKIP) Radio frequency: 2.4 GHz Bluetooth section Communication system Bluetooth Specification version 3.0 Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m1) Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs3) SBC4), AAC Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. 2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. 3) Codec: Audio signal compression and conversion format 4) Subband Codec General Power requirements Area USA, Canada Mexico Brazil Power requirements 120 V AC, 60 Hz 127 V AC, 60 Hz 127/220 V AC, 60 Hz Power consumption 240 W Power consumption (during standby mode) 0.3 W (When "Control for HDMI", "Pass Through", "Network Standby", and "Bluetooth Standby" are set to "Off", and the receiver in zone 2 is turned off.) Dimensions (width/height/depth) (Approx.) 430 mm × 172 mm × 329.4 mm (17 in × 6 7/8 in × 13 in) including projecting parts and controls Mass (Approx.) 10.0 kg (22 lb 1 oz) Design and specifications are subject to change without notice. 130US