Sony STR-K4800P HT4800DP Instructions (main HT model) - Page 44

HT-5800DP only (SA-WMSP68) HT-4850DP and HT-4800DP only (SA-WMSP76) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 6 ohm loads, from 28 - 200 Hz; rated 100 watts (SA-WMSP68)/75 watts (SA-WMSP76), minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output. Speaker system Speaker unit SA-WMSP68 SA-WMSP76 Enclosure type RMS output: SA-WMSP68 SA-WMSP76 Input Power requirements Area code U, CA Active subwoofer, magnetically shielded 250 mm cone type 200 mm cone type Acoustically loaded bass reflex 120 W (6 ohms, 100 Hz, THD 10%) 100 W (6 ohms, 100 Hz, THD 10%) LINE IN (input pin jacks) Power requirements 120 V AC, 60 Hz Power consumption SA-WMSP68 95 W SA-WMSP76 75 W Dimensions (w/h/d) (Approx.) SA-WMSP68 337 × 410 × 366 mm (13 3/8 × 16 2/8 × 14 4/8 inches) including front panel SA-WMSP76 270 × 325 × 398 mm (10 3/4 × 12 7/8 × 15 3/4 inches) including front panel Mass (Approx.) SA-WMSP68 13.0 kg (28 lb 11 oz) SA-WMSP76 9.0 kg (19 lb 14 oz) Supplied accessories FM wire antenna (1) AM loop antenna (1) Speaker connecting cord, long (2) Speaker connecting cord, short (3) Monaural connecting cord (1) Coaxial digital cord (1) Foot pads (speakers) (20) Foot pads (subwoofer) (4) Remote commander (1) R6 (size-AA) batteries (2) Front speakers (2) • HT-5800DP/HT-4850DP (SS-MSP68) • HT-4800DP (SS-MSP760L/SS-MSP760R) Center speaker (1) • HT-5800DP/HT-4850DP (SS-CNP68) • HT-4800DP (SS-CNP760) Surround speakers (2) • HT-5800DP/HT-4850DP (SS-MSP68) • HT-4800DP (SS-MSP760SL/SS-MSP760SR) Sub woofer (1) • HT-5800DP (SA-WMSP68) • HT-4850DP/HT-4800DP (SA-WMSP76) For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice. 44US