Sony STR-K751P Manual - Page 45

AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1710 kHz4) With 9-kHz tuning scale: 531 - 1710 kHz4) Antenna Loop antenna Intermediate Frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or 999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.5 % (50 mV/m, 400 Hz) Selectivity At 9 kHz: At 10 kHz: 35 dB 40 dB 4) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs Video: Outputs Video: 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power consumption Area code Power consumption U 185 W CA 270 VA Power consumption (during standby mode) 0.3 W Dimensions 16 7/8 × 5 6/8 × 11 6/8 inches including projecting parts and controls Mass (Approx.) 15 lb 14 oz Speaker section SS-MSP75 for front and surround speakers SS-CNP75 for center speaker Speaker system Full range, magnetically shielded Speaker units 70 mm × 100 mm cone type Enclosure type Bass reflex Rated Impedance 8 ohms Power handling capacity (Maximum input power) 100 W Sensitivity level 86 dB (1 W, 1 m) Frequency range 160 Hz - 20,000 Hz Dimensions (w/h/d) SS-MSP75 SS-CNP75 Mass SS-MSP75 SS-CNP75 Approx. 3 5/8 × 6 × 5 inches Approx. 9 1/8 × 3 5/8 × 5 inches 1 lb 13 oz 2 lb 4 oz SA-WMSP85 for sub woofer AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, from 28 - 200 Hz; rated 100 watts, minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output (Models of area code U only). Speaker system Active subwoofer, magnetically shielded Speaker unit Woofer: 20 cm cone type Enclosure type Acoustically loaded bass reflex continued Additional Information 45US