Sony VGPWKB5 Operating Instructions - Page 23
Symptom, Cause/Remedy
UPC - 027242723962
View all Sony VGPWKB5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Symptom The keyboard enters energy-saving mode and LCD indicators turn off. After the receiver was connected, it takes some time until the keyboard can be used. The keyboard does not work. S1-S3 buttons do not work as supposed. Cause/Remedy c Press any key on this unit or turn ON/OFF the keyboard power. c If Windows, a software program, or another USB device is currently busy, it may take a while for the receiver to be recognized. • The connection between keyboard and receiver fails. c Make sure the (Connect) indicator turns on. • The receiver is not connected to the computer. c Connect the receiver to the computer. • The receiver is not recognized by the computer. c Disconnect the receiver cable from the computer's USB port, then reconnect it. c Check the distance between the keyboard and the receiver. Place the keyboard and receiver within the communication range given in the specifications. If used on a metal table or if there are metal objects near the keyboard, the usable distance may be shorter. c Make sure that there are batteries in the keyboard. Insert the batteries into the keyboard properly, and press the CONNECT button on the receiver. Then, within 10 seconds, press the CONNECT button on the keyboard. Make sure that the keyboard is close to the receiver (within 11.8 in. or 30 cm) when you press the button. c The functions of S1-S3 buttons on the notebook computer's keyboard and those on this unit may vary. 23 GB