Sony VPCL218FX VPCL2 Series Hard Disk Drive Replacement Instructions - Page 2
VPCL2 Series Hard Disk Drive, Replacement Instructions
View all Sony VPCL218FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
VPCL2 Series Hard Disk Drive Replacement Instructions Hard Drive Cables Step 4. Grasp the Door stand and rotate up to disengage the Tabs holding the Door in place. When the Tabs release, lift the Door straight up to remove. Step 5. Using the enclosed magnetic screwdriver, loosen the four (4) screws securing the Hard Drive Assembly. The screws will loosen but not cannot be completely removed from the Hard Drive. Step 6. Grasping the Hard Drive from the right side, lift up to expose the Hard Drive Cables as shown. Hard Drive Disassembly (Steps 8-12) Old Hard Drive Step 7. For each Hard Drive Cable, grasp the Tab on the connector and slide the Cable away from the Hard Drive to disconnect. Remove the Hard Drive from the unit. Step 8. Remove the four (4) screws which secure the Bracket to the Hard Drive. Lift the Hard Drive Bracket straight up to remove. Put the screws aside to secure the Bracket to the New Hard Dive later in the procedure. Step 9. Set the old Hard Drive aside. FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST P/N 989202623 Rev. B 2/4