Sony VPL CX6 Operating Instructions - Page 16
Before using the Remote, Commander, To replace battery, holder from the Remote Commander. - projector
UPC - 027242627031
View all Sony VPL CX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Before using the Remote Commander Pull out the clear film from the lithium battery holder. To replace battery 1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander. 3 Put the lithium battery holder back into the Remote Commander. Notes on the lithium battery • Keep the lithium battery out of the reach of children. • Should the battery be swallowed, immediately consult a doctor. Notes on Remote Commander operation • Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the front or rear remote control detector. • The operation range is limited. The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the commander can control the projector becomes. 2 Install the lithium battery. + side facing upward 16 GB Location and Function of Controls