Sony XR-CA350X Operating Instructions (primary manual) - Page 18

No Mag, No Disc, Error, Blank, Reset, Not Ready, Hi Temp

Page 18 highlights

Error displays (when an optional CD/MD unit is connected) The following indications will flash for about 5 seconds, and an alarm sound will be heard. Display Cause Solution NO MAG The disc magazine is not inserted in Insert the disc magazine in the CD/ the CD/MD unit. MD unit. NO DISC No disc is inserted in the CD/MD unit. Insert discs in the CD/MD unit. A CD is dirty or inserted upside down.*2 Clean or insert the CD correctly. ERROR*1 An MD does not play because of some Insert another MD. problem.*2 A CD/MD cannot play because of some problem. Insert another CD/MD. BLANK *1 No tracks have been recorded on an MD.*2 Play an MD with tracks recorded on it. RESET The CD/MD unit cannot be operated Press the RESET button of the unit. because of some problem. NOT READY The lid of the MD unit is open or MDs Close the lid or insert the MDs are not inserted properly. properly. HI TEMP The ambient temperature is more than Wait until the temperature goes 50°C (122°F). down below 50°C (122°F). *1 When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display. *2 The disc number of the disc causing the error appears in the display. If the above-mentioned solutions do not help improve the situation, consult your nearest Sony dealer. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

18
Error displays
(when an optional CD/MD unit is connected)
The following indications will flash for about 5 seconds, and an alarm sound will be heard.
*
1
When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear
in the display.
*
2
The disc number of the disc causing the error appears in the display.
If the above-mentioned solutions do not help improve the situation, consult your nearest Sony
dealer.
Solution
Insert the disc magazine in the CD/
MD unit.
Insert discs in the CD/MD unit.
Clean or insert the CD correctly.
Insert another MD.
Insert another CD/MD.
Play an MD with tracks recorded on
it.
Press the RESET button of the unit.
Close the lid or insert the MDs
properly.
Wait until the temperature goes
down below 50°C (122°F).
Display
NO MAG
NO DISC
ERROR
BLANK
RESET
NOT READY
HI TEMP
Cause
The disc magazine is not inserted in
the CD/MD unit.
No disc is inserted in the CD/MD unit.
A CD is dirty or inserted upside
down.
*
2
An MD does not play because of some
problem.
*
2
A CD/MD cannot play because of
some problem.
No tracks have been recorded on an
MD.
*
2
The CD/MD unit cannot be operated
because of some problem.
The lid of the MD unit is open or MDs
are not inserted properly.
The ambient temperature is more than
50°C (122°F).
*
1
*
1