Sony Xperia Z4 Tablet Help Guide - Page 48
Sharing Your Cellular Data Connection, To Connect to a Wi-Fi Network Using a WPS PIN - android 10
View all Sony Xperia Z4 Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
To Connect to a Wi-Fi Network Using a WPS Button 1 From the Home screen, tap . 2 Find and tap Settings > Wi-Fi. 3 Turn on Wi-Fi if it is not already on. 4 Tap , then tap More features > WPS Push Button, then press the WPS button on the WPS-supported device. To Connect to a Wi-Fi Network Using a WPS PIN 1 From your Home screen, tap . 2 Find and tap Settings > Wi-Fi. 3 Turn on Wi-Fi if it is not already on. 4 Tap > More features > WPS PIN Entry. 5 On the WPS-supported device, enter the PIN that appears on your device. Sharing Your Cellular Data Connection You can share your cellular data connection with other devices in several ways: • USB tethering - share your cellular data connection with a single computer using a USB cable. • Bluetooth® tethering - share your cellular data connection with up to four other devices via Bluetooth®. • Portable hotspot - share your cellular data connection simultaneously with up to 10 other devices via WiFi, including devices that support WPS technology. To Share Your Data Connection Using a USB Cable 1 Connect your device to a computer, using the USB cable that came with it. 2 From your Home screen, tap . 3 Find and tap Settings > More > Tethering & portable hotspot. 4 Tap the USB tethering slider, then tap OK if prompted. is displayed in the status bar once you are connected. 5 To stop sharing your data connection, tap the USB tethering slider or disconnect the USB cable. You cannot share your device's data connection and SD card over a USB cable at the same time. To Share Your Cellular Data Connection With Another Bluetooth® Device 1 Make sure your device and the other Bluetooth® device are paired with each other and cellular data traffic is activated on your device. 2 Your device: From your Home screen, tap . 3 Find and tap Settings > More > Tethering & portable hotspot and then tap the Bluetooth tethering slider to enable the function. 4 Bluetooth® device: Set up the device so it gets its network connection using Bluetooth®. If the device is a computer, refer to the relevant instructions to complete setup. If the device runs on the Android™ operating system, tap the settings icon beside the name of the device it is paired with under Settings > Bluetooth > Paired devices, then mark the Internet access checkbox. 5 Your device: Wait for to appear in the status bar. Once it appears, the setup is complete. 6 Tap the Bluetooth tethering slider again to disable the function. The Bluetooth tethering function is turned off every time you turn off your device or turn off the Bluetooth® function. 48 This is an Internet version of this publication. © Print only for private use.