Stihl BR 550 Technical Guide - Page 19
Technical Information, Only operate the device when the arrester is, correctly mounted.,
View all Stihl BR 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Technical Information 08.2005 Page 19 . Run the arrester (1) through the pleated hose (7) and hose clip (9) (hose clip with the retention groove for the throttle cable) - screw head and retention groove facing forward. . Shove nozzle (13) (depending on the market region) onto blower tube (2), and lock the buttons (14). Only operate the device when the arrester is correctly mounted. Check the following: . Shove the hose clip (9) onto the pleated hose (7). . Hook the discharge wire hook (1) in the loop (10). . The hook on the arrester is always in the loop (arrow) . Shove the pleated hose (7) with the hose clip (9) in the shown position over the manifold (11). . Tighten down the screw (12). . The sleeve on the arrester is always clipped in the holder (arrow) TI_08_2005_11_01_02.fm