Stihl KM 130 R Product Instruction Manual - Page 16
-MIX Engine, Fuel, Securing the loop handle - fuel mix
View all Stihl KM 130 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4-MIX Engine Fuel English / USA A 9 4 10 Securing the loop handle : Secure the loop handle (4) approx. 8"/20cm (A) forward of the control handle (9). : Line up the loop handle. : Tighten down the screws firmly - lock the nuts if necessary. 10= Sleeve* 002BA147 KN The STIHL 4-MIX engine features gasoil lubrication and must be run on a fuel mixture of gasoline and engine oil. It operates otherwise on the 4-stroke principle. This engine is certified to operate on unleaded gasoline and the STIHL twostroke engine oil at a mix ratio of 50:1. Your engine requires a mixture of highquality gasoline and quality two-stroke air cooled engine oil. Use mid-grade unleaded gasoline with a minimum octane rating of 89 (R+M/2). If the octane rating of the mid-grade gasoline in your area is lower, use premium unleaded fuel. Fuel with a lower octane rating may increase engine temperatures. This, in turn, increases the risk of piston seizure and damage to the engine. The chemical composition of the fuel is also important. Some fuel additives not only detrimentally affect elastomers (carburetor diaphragms, oil seals, fuel lines, etc.), but magnesium castings and catalytic converters as well. This could cause running problems or even damage the engine. For this reason STIHL recommends that you use only nationally recognized high-quality unleaded gasoline! * see "Guide to Using this Manual" KM 110, KM 130 15