TEAC AI-301DA Owner's Mamual (English, Français, Español) - Page 17
Automatic power saving (APS) function, When automatic power saving APS is
View all TEAC AI-301DA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Automatic power saving (APS) function This unit has an automatic power saving function. The operation of this function depends on the automatic power saving (APS) setting and the selected input source. When automatic power saving (APS) is on If there is no signal from the selected input source and no operation has occurred for about 30 minutes, the unit will enter standby mode.* Operation of the main unit or the remote control will end standby mode. When automatic power saving (APS) is off If the input source is USB, Bluetooth, COAXIAL or OPTICAL If there is no signal from the selected input source and no operation has occurred for about 3 minutes, the unit will enter sleep mode.** Signal input or operation of the main unit or the remote control will end sleep mode (automatic power on function). If the input source is LINE 1 or LINE 2 Unit will never enter standby or sleep modes. *Power consumption in standby mode is 0.5 W or less. **Power consumption in sleep mode is about 1.2 W. Checking the automatic power saving setting If automatic power saving is off, all the input indicators will light temporarily when the unit is turned on. Setting the automatic power saving function When the unit is on, press and hold the ¤ button for five seconds until all the input indicators light or turn off. No indicators lit: APS on All indicators lit: APS off Press and hold 17