TEAC AX-501 Owner's Mamual (English, Français, Español) - Page 8
Connecting speakers 2, Connecting speakers using banana plugs, For European customers
View all TEAC AX-501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting speakers (2) Connecting speaker cables 1 Remove about 1 cm (0.4") of the sheath at the end of the speaker cable and twist the cable core well. 2 Turn the terminal cap left (counterclockwise) to loosen it. Connecting speakers using banana plugs You can also connect speakers using commercially available banana plugs. Connect the speaker cable to the banana plug first, and then insert the plug into the terminal. ooLoosen the terminal cap before using the banana plug. ooCarefully read the instructions of the banana plugs that you intend to use with this unit. 3 Insert the wire into the hole in the terminal screw and turn the terminal cap right (clockwise) to connect it securely. For European customers In accordance with European safety regulations, it is not possible to connect banana plugs to the speaker terminals on European models. The holes into which banana plugs are inserted have been covered with black caps. Connect the speakers using spades or bare wires. If the black caps become separated from the terminals, return them to their original position. ooDo not allow the cable sheath to touch the terminal. 4 Make sure it is connected securely by gently pulling on the cable. 8