TEAC CD-P650 CD-P650 Manual - Page 7
Connections - cd usb
View all TEAC CD-P650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connections C A B D CD-P650 E RL CD REMOTE CONTROL Amplifier (A-R650) AC wall socket DIGITAL IN OPTICAL D/A converter, etc. CAUTION < Turn off the power of all the equipment before making connections. < Read the instructions of each component you intend to use with this unit. ENGLISH A LINE OUT jacks These jacks transmit an analog 2-channel audio signal. Connect these jacks to the TUNER jacks of the amplifier (A-R650) with a stereo RCA pin cable. Be sure to connect the cable as follows: white plug q white jack (L: left channel) red plug q red jack (R: right channel) White (L) Red (R) White (L) Red (R) < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal connection cables together with the AC power cord or speaker cables. B REMOTE CONTROL jack If you have a TEAC A-R650, convenient system control operations are available: < When you press the PLAY button, the input selector of A-R650 is set to "CD" automatically. < When A-R650 is turned on while the input selector of A-R650 is set to "CD", playback of a CD will start automatically. Connect the REMOTE CONTROL jack (A or B) to the REMOTE CONTROL jack of A-R650 with the provided remote control connection cord. < You can use the following buttons of the remote control provided with TEAC A-R650: CD (switch the function of CD-P650 between "CD" and "USB") When the function is "CD": PLAY/PAUSE(t/J), STOP(H), ., /, REPEAT, SHUFFLE, TIME, Numeric buttons (1 - 0) When the function is "USB" (also for playback of an iPod): PLAY/PAUSE(t/J), STOP(H), ., /, REPEAT, SHUFFLE C SELECTOR switch If the REMOTE CONTROL jacks of this unit and A-R650 are connected with the remote control connection cord, select "SYSTEM". You can use the remote control unit provided with A-R650, and convenient system control operations will be available. When you don't use the system control operations, or you don't have an A-R650, select "SINGLE". D DIGITAL OUT terminal (optical) Digital 2-channel audio signal is output from this terminal. Connect it to the digital input terminal of a digital device such as a D/A converter, etc. Use a commercially-available optical digital cable. E AC power cord After all other connections are complete, connect the plug to the AC wall socket. < Be sure to connect the power cord to an AC outlet which supplies the correct voltage. < Hold the power plug when plugging in or unplugging the power cord. 7