TEAC DP-004 DP-004 version 1.01 release notes - Page 1
TEAC DP-004 Manual
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
DP-004 Release Notes Updates Always use the most recent firmware for this device. Please visit the TASCAM web site at http://tascam.com/ to check for the latest firmware. Maintenance items V1.04 fixes If recording was conducted until the capacity of the SD card was filled, I/F Error appeared and recording did not complete correctly in some cases. This has been fixed. V1.03 fixes Operation reliability has been improved. V1.02 fixes •• The following selection items are added to the INPUT SETTING screen so you can record a low output guitar with the most suitable level. IN A GUITAR/LINE M: Guitar or Line (Middle sensitivity) GUITAR/LINE H: Guitar or Line (High sensitivity) IN B LINE Mid: Line (Middle sensitivity) LINE High: Line (High sensitivity) If you feel the input level is low when you select GUITAR/LINE or LINE as an input source, select GUITAR/ LINE M or GUITAR/LINE H for IN A or LINE Mid or LINE High for IN B. NOTE: If the OL indicator of the selected input lights by selecting the above setting, the sensitivity is too high. Turn down the volume of the input source or use the previous selection item. [Inputs set to GUITAR/LINE M and LINE Mid] V1.01 fixes A bug that caused the tuner not to function has been fixed. Confirmation of firmware version Confirm the firmware version of your DP-004 before conducting a firmware update. 1 Turn the unit's power ON. 2 When the Home Screen is open, press the MENU key to open the MENU screen. 3 Use the DATA wheel to select INFORMATION item and press the F4 (¥) key to open the INFORMATION screen SONG (1/4) page. 4 Use the F3 (PREV) and F4 (NEXT) keys to open the F/W (4/4) page. If the System Version shown here is the same or newer than the firmware version that you planned to update to, then there is no need to update it. Firmware update procedures CAUTION When updating the firmware, be sure that the batteries have sufficient charge or power the unit using a TASCAM PS-P520 AC adaptor (sold separately). The program has been set so that the update will not be conducted if battery power is insufficient. 1 Download the most recent firmware from the TASCAM web site (http://tascam.com/). If the file that you have downloaded is compressed in ZIP format, for example, decompress it. 2 Turn the unit's power ON and use the included USB cable to connect it with a computer. This unit will be recognized as an external drive (external storage device) by the computer. 3 Copy the downloaded firmware (DP004-41.101 for V1.01) to the UTILITY folder on the DP-004. 4 After copying has completed, disconnect the unit from the computer following the correct procedures, remove the USB cable and turn the unit power OFF. 5 While pressing and holding both the REPEAT and UN/REDO keys, turn the unit power ON. The unit starts up in update mode, and the update file appears on the screen. [Inputs set to GUITAR/LINE H and LINE High] •• When using an SD card of 2GB or larger, EXPORT TRACK, EXPORT MASTER and SONG BACKUP are executed about 20% faster. D01066400C TASCAM DP-004 1