TEAC DP-008 DP-008 version 1.01 release notes - Page 2
Release Notes - others
 |
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
DP-008 Release Notes 6 Use the F1 (§) and F2 (¶) keys to select the firmware and press the F4 (NEXT) key to open the following screen. The current version appears on the left and the updated version appears on the right. NOTE The screen shown is an example. The actual display differs. 7 Press the F3 (YES) key to start the update. 8 When the update is complete, the power turns OFF automatically. Turn the power ON again. 9 Follow the "Confirmation of firmware version" instructions above to check that the System Version is now the most recent version of the firmware. This completes the procedure for updating this unit. 10 Connect to a computer with USB and delete the firmware update from the unit's UTILITY folder. 2 TASCAM DP-008
-
1 -
2
 |
 |
2
TASCAM DP-008
DP-008
Release Notes
6
Use the F1 (
§
) and F2 (
¶
) keys to select the
firmware and press the F4 (
NEXT
) key to open the
following screen.
The current version appears on the left and the
updated version appears on the right.
NOTE
The screen shown is an example. The actual display differs.
7
Press the F3 (
YES
)
key to start the update.
8
When the update is complete, the power turns OFF
automatically. Turn the power ON again.
9
Follow the “Confirmation of firmware version”
instructions above to check that the
System
Version
is now the most recent version of the
firmware.
This completes the procedure for updating this unit.
10 Connect to a computer with USB and delete the
firmware update from the unit’s
UTILITY
folder.