TEAC HS-4000 HS-4000 Owner's Manual

TEAC HS-4000 Manual

Get TEAC HS-4000 PDF manuals and user guides View all TEAC HS-4000 manuals
Add to My Manuals
Save this manual to your list of manuals

TEAC HS-4000 manual content summary:

  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 1
    D01134020A HS-4000 4 Channel Audio Recorder OWNER'S MANUAL
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 2
    servicing) instructions by TEAC Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures CE Marking Information a) Applicable electromagnetic environment: E4 b) Peak inrush current: 14 A 2 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 3
    Install in accordance with the manufacturer's instructions. 8 Do not install near device shall remain readily operable. •• Products with Class I construction are equipped with a power supply cord time. 14 Refer all servicing to qualified service personnel. Servicing is required when the TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 4
    IMPORTANT SAFETY INSTRUCTIONS By changing the positions where the rack mount ears are attached to the unit, it is possible to install the unit into a rack that attach the rack mount ears from each side and then use the screws to reattach the ears as shown in the illustration below. 4 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 5
    Contents IMPORTANT SAFETY INSTRUCTIONS 2 1 − Introduction 8 Features 8 Included items 8 Conventions used in this manual 8 Intellectual property rights 9 Precautions for placement and use 9 Beware of 45 BWF-J cue point 45 Importing and exporting AES31 editing information TASCAM HS-4000 5
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 6
    Saving a playlist 67 Creating a JPPA PPL file from the loaded playlist 68 6 TASCAM HS-4000 Playback 69 Project/session/playlist selection 69 Selecting the current player 70 Setting the online Editing mark positions 86 Editing mark names 86 Manual locate function 87 12 - Other functions 88
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 7
    UIF JNQPSUFE GJMF UP CF VTFE CZ UIJT VOJU TFTTJPOSFCVJMEJOH 93 15 - Troubleshooting 94 16 - Messages 95 17 - Specifications 103 General 103 Inputs and outputs 103 Analog audio inputs Other specifications 105 Dimensional drawings 106 Block diagram 107 Contents TASCAM HS-4000 7
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 8
    HS-4000 1  Power cord set 1  Rack-mounting screw kit 1  Security screws 3  Warranty card 1  Owner's manual (this manual 1 Conventions used in this manual In this manual these instructions could result in injury, damage to equipment or lost recording data, for example. 8 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 9
    and/or information. TEAC Corporation disclaims any warranty to direct sunlight w Near heaters or other extremely hot places TASCAM CF cards, but use of other CF cards that are available commercially is possible. Microdrives cannot be used with this unit. The capacities and performance of your HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 10
    USB flash drive, for example, you can back up data from a CF card and save files to the card. (Support planned in a version upgrade.) By connecting a USB keyboard, you can input the names of projects and sessions, for example the PAUSE and REC keys light when in recording standby. 10 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 11
    you return to the original position when in shuttle operation mode, the transport status is restored to how it was before shuttle playback was begun. TASCAM HS-4000 11
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 12
    player A outputs from connector 1, while player B outputs from connector 2. ˓34 REMOTE connectors Connect a TASCAM RC-HS32PD remote control (sold separately) here. CAUTION This is not an Ethernet connector (LAN, etc ・ The WORD/VIDEO output THRU/OUT setting (OUT is only for WORD) 12 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 13
    to be made functional in a future firmware version update.) ˓42 GROUND terminal When using a TASCAM RC-HS32PD remote control (sold separately), depending on the operating environment, the color display might to use with the GROUND terminal.) 2 − Names and functions of parts 13 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 14
    protocol (RS-422). Make settings related to operation on the REMOTE SETUP screen RS-422page. (See "RS-422 page" on page 77.) NOTE Please contact TASCAM customer support for information about this unit's protocol compatibility. 14 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 15
    This outputs (exports) the session as an AES31 file. This can only be selected when stopped. (See "Exporting AES31 editing information" on page 46.) 15 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 16
    and subfolders, inside a session folder exceeds about 5000, recording becomes impossible and Rec Limitis shown. For details, see "Recording operation limitations" on page 30. 16 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 17
    during playback and recording. (The first half of the take name and the letter in the second half can only be changed when stopped.) 17 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 18
    the mark list. (See "Mark list screen" on page 84.) ˓24 Manual Locate button Touch this button to open the MANUAL LOCATE screen. (See "Manual locate function" on page 87.)  In take mode or single playlist mode 25 (See ʠUsing @ with take namesʡ on page 55.) In single playlist mode 18 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 19
    playlist is shown. The time remaining until the end of the playlist is shown. The time code time of the playing entry is shown. 19 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 20
    that player. This is the same as on the Home Screen in timeline mode. ˓44 Manual Locate button Touch this button to open the MANUAL LOCATE screen for that player. Otherwise, this is the same as on the Home Screen and JOG/SHUTTLE dial on the front panel to the corresponding player. 20 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 21
    close the slot cover, remove the CF card once, press the square button to the right of the slot and then reinsert the card. 21 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 22
    more of the pixels are effective, but sometimes pixels might not appear or might appear as red or black dots. This is not a malfunction. 22 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 23
    the clock before making your first recording. If you do not set the clock, the time stamps on recording files will not be correct. 23 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 24
    , if an operation is conducted using RS-232C, RS-422, PARALLEL or ETHERNET, the following pop-up message appears when external input is locked. 24 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 25
    .  The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the CF card. 3 - Preparation 25 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 26
    the CF MANAGEscreen. 6. If you also want to format the CF card now, follow the procedures starting with step 3 in "Formatting a CF card" below. 26 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 27
    , bit rate, frame type and number of tracks in the project to be created. 11. Touch the OKbutton on the pop-up message. During 27 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 28
    where 3. Select the master clock that you want to use from the MASTER item. (See "Sync and time code settings (SYNC T/C)" on page 73.) 28 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 29
    details about this screen, see "ANALOG Ref. LEVEL ADJUST page" on page 80. NOTE On the CLOCK ADJUSTpage, you can change the system time. 29 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 30
    visible are also included in the total. The ONLINE switch lights when ON. You can also connect a TASCAM RC-HS32PD remote controller (sold separately), for example, and use its master fader to adjust the level details about the online function, see "Online functions" on page 89. 30 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 31
    mode, you might have to wait more than 4 seconds. NOTE ・ The default setting is SubFolder. ・ Monophonic mode is planned for a future firmware version upgrade. 31 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 32
    shows information about the session that is currently selected. If no session is selected, press this button to show information about the current project. 32 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 33
    the operation mode is playlist mode.  Session name display This shows the current session name Touch this area to show the session selection screen. 33 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 34
    Current Setting button to use the current settings of other parameters when creating the project or touch Factory Preset to use the default settings. 34 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 35
    change the name. NOTE Session names cannot be changed later. Loading projects 1. Press the PROJECT key on the front panel to open the PROJECTscreen. 35 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 36
    in the pull-up menu. CAUTION When you erase a project, all session folders, session data, takes and playlists in the project are also erased. 36 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 37
    . After loading completes the Home Screen opens. NOTE The letter "C" appears in the session. icon to the left of the name of the current 37 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 38
    existing one appears. Touch the OKbutton or press the DATA dial to overwrite the existing file and copy the selected session to the destination. 38 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 39
    also erased. Session selection screen When Timeline mode AES31 file selection screen When Take mode Take selection screen When Playlist mode Playlist selection screen 39 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 40
    and used for playback.  Reading and editing of BWF-J chunks is possible. (Support for BEXT and CM chunks is planned for a future firmware version upgrade.)  and editing of BWF-J chunks is possible. (Support for BEXT and CM chunks is planned for a future firmware version upgrade.) 40 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 41
    MODE TAKE MODE PLAYLIST MODE (SINGLE) PLAYLIST MODE (DUAL) 4. Press the SET button to enable the selected mode and return to the Home Screen. 41 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 42
    . If this happens, change the project name.  You can also touch the CREATE PROJECTbutton on CREATE PROJECT screens 1/3 and 2/3 to create a project. 42 TASCAM HS-4000 To input the session name follow the same procedures in "Editing the project name" on page 35. NOTE You cannot use the "@" symbol at
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 43
    and the use of auto markers. For details, see "OPTIONS page" on page 72. 2. Press the REC SETUPbutton to open the REC SETUP screen. 43 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 44
    to the recording start position Use the m [ ] and , [ ] keys, jump to a mark or use the manual locate function to locate to the time where you want to start recording. When time code synchronization is ON, recording will , the REC and PAUSE keys on the front panel will be lit. 44 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 45
    the playback start position Use the m [ ] and , [ ] keys, jump to a mark or use the manual locate function to locate to the time where you want to start playback When time code synchronization is ON, playback will point is reached, a BC$PAUSE tally is output, and playback pauses. 45 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 46
    want to overwrite that file or not. Touch the OKbutton to overwrite that file, or touch the CANCELbutton to return to the AES31 NAMEscreen. 46 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 47
    with white letters when it is possible to undo an edit.  Only the last edit can be undone. Undoing earlier edits is not possible. 47 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 48
    the Home Screen, and then touch the SAVEbutton in the pull-down menu to save the session. After saving completes, the Home Screen reopens. 48 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 49
    confirmation pop-up message appears. After session creation completes, the Home Screen opens. For details about session operations, see "Session operations" on page 37. 49 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 50
    and the use of auto markers. For details, see "OPTIONS page" on page 72. 2. Press the REC SETUPbutton to open the REC SETUP screen. 50 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 51
    are high for TALLY_RECORD and low for TALLY_PAUSE. When in recording standby, the REC and PAUSE keys on the front panel will be lit. 51 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 52
    to stop playback. Press the. [MARK.] key or / [MARK/] key to switch takes. Press and hold the m [ backward or forward. ] or , [ ] key to search 52 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 53
    is reached, a BC$PAUSE tally is output, and playback pauses. Using the flash start function in take mode Using a TASCAM RC-HS32PD (sold separately) or other remote controller, flash start playback is possible. For details, see "Flash start function" on page 90. 8 - Take mode 53 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 54
    . 7. On the TAKE T/Cscreen, use the FRAME EDITbutton to set whether or not to input the frame value. Frame edit on Frame edit off 54 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 55
    is available with a version upgrade. TIP Use this function to add "@" to good takes, for example. CAUTION Take names cannot be edited. 8 - Take mode 55 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 56
    -up message appears.  5. Touch the NEW button in the pull-up menu to open the PLAYLIST NAMEscreen where you can input the playlist name.  56 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 57
    is created it becomes the currently loaded playlist. CAUTION When a JPPA PPL format file is loaded, playlists are created for both player A and player B. 57 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 58
    the playlist you want to load to open the playlist selection screen. If it is not the current session, a pop-up window appears 58 TASCAM HS-4000 Dual mode After loading completes, the Home Screen opens. NOTE On the playlist selection screen, instead of touching the MENU button followed by the
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 59
    .  During erasing, a progress status pop-up appears. When erasing completes, the pop-up disappears. NOTE You cannot delete the currently loaded playlist. 9 - Playlist mode 59 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 60
    okay Entry is a format that cannot be played back No entry ˓6 INFO button When an entry is selected, press this button to open an 60 TASCAM HS-4000 information pop-up for that entry. When an entry is not selected, press this button to show information about the current playlist. ˓7 PLAY buttons
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 61
    the Entry List screen to open the Assign File screen. 3. First, select the key assign button of the take that you want to assign. 61 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 62
    -12 B1-12 1 2 3 Page 4 ʵ number 5 ʵ 6 ʵ 7 ʵ ʵ ʵ 8 ʵ ʵ ʵ Note: "―" means there is no corresponding page. ʠA:" indicates entry numbers for the Player A playlist, and "B:" for the Player B playlist. 62 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 63
    you touch the Enterbutton, a "Cannotchangenow.CurrentlyPlaying" message appears, and you will not be able to edit the title. Stop playback before touching the Enterbutton. 63 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 64
    here. ・ This can also be edited using an externally connected keyboard. ・ Press the keyboard's ESC key to clear all the values. Assign File Screen 64 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 65
    input that value here. ・ This can also be edited using an externally connected keyboard. ・ Press the keyboard's ESC key to clear all the values. 65 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 66
    input that value here. ・ This can also be edited using an externally connected keyboard. ・ Press the keyboard's ESC key to clear all the values. 66 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 67
    SAVEbutton, you can name the playlist before saving it. 1. Press the HOME key on the front panel to open the Home screen. Dual Mode 67 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 68
    overwrite that file or not. Touch the OK button to overwrite that file, or touch the CANCELbutton to return to the AES31 NAME screen. 68 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 69
    DATA dial. When in dual mode, the pop-up window has LOAD to Aand LOAD to B buttons. Touch the one for the desired player. 69 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 70
    this point is reached, a BC$PAUSE tally is output, and playback pauses. Using the flash start function in playlist mode Using a TASCAM RC-HS32PD (sold separately) or other remote controller, flash start playback is possible. For details, see "Flash start function" on page 90. 70 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 71
    are saved in subfolders created for each take within the session folder. Session Root button: Audio files are saved directly in the session folder. 71 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 72
    memory for the set amount of time, allowing a maximum of 5 seconds to be recorded before recording is started manually. To set the pre-recording time, touch the knob, and adjust the value using the DATA dial. Setting be when the level exceeds the maximum level minus 0.20 dB.) 72 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 73
    the front panel of the unit, the PLAY key, flash start keys and fader start function of the TASCAM RC-HS32PD remote control (sold separately), and play and flash start commands from external controllers (RS-422, information Unmatched Cbit differs from the actual operation mode 73 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 74
    with timecode input from another device. Internal button: Synchronize with the built-in generator. External button (default): Synchronize with timecode input from another device. 74 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 75
    Set the time code frame type of the currently loaded project. Setting buttons: 23.976F, 24F, 25F, 29.97DF(default), 29.97ND, 30DF, 30ND 75 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 76
    off. In this state, if you press the Fader Start key on the TASCAM RC-HS32PD remote controller, a "Cannot Change Now. Fixed in current mode" to One Take, when the currently playing entry completes playback, the 76 TASCAM HS-4000 AUX Assign Touch a knob to select it, making the background yellow,
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 77
    settings on this page. Serial Mode Set the serial connection mode with the following buttons. RS-232C support is planned for a future firmware version upgrade. Setting buttons: RS-232C, RS-422(default) NOTE with video signal frame edges OFF: Independent from video frame clock 77 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 78
    indicators If the left or right monitoring mixer channel overloads, the background of the corresponding L or R becomes red. Single player mode Dual player mode 78 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 79
    (default) and Fast NOTE If you press the EXIT/CANCEL (PEAK CLEAR) key when the Home Screen is open, the peak hold display resets. 79 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 80
    allow online playback mode to be enabled from the parallel connector, serial connector (RS-232C) or a TASCAM RC-HS32PD remote controller (sold separately). Set to AlwaysONto not allow online playback to be used and touch the SET button, the clock starts again and the ":" blinks. 80 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 81
    the bottom center of the screen to show the version of the internal device data and the version of any TASCAM RC-HS32PD remote controller (sold separately) connected to the unit. Managing CF cards (CF MANAGE) Use this screen CF card in the current CF slot to the other CF slot. 81 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 82
    aware, however, if you change or erase files inside a project, or change any names, the HS-4000 might not be able to play that project. 82 TASCAM HS-4000 ROOT Project01 Session001 (POLY example) defaultAES.adl *1 Session001-T001.wav Session001-T002.wav │ │ │: │ │ │: Session001
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 83
    number].wav 1-4 track mono files (planned for a future firmware version upgrade) [Take name first half]-[letter][take number]_[track number].wav 10 - Internal settings 83 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 84
    scroll one page (five lines) forward or backward. You can also scroll through the mark list one line at a time using the DATA dial. 84 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 85
    MARK LIST screen might show a TOTAL number of marks that is 2 or 3 greater than the sum of the MANUAL MARK, TIME, OVER and UNLKmarks. This is because the total includes REC, END and PRE (when using prerecording) DATA dial to erase the mark. Erasing a mark using the MARK LIST screen 85 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 86
    name If you want to input a BWF-J cue, touch the BC$button at the upper right and select a cue name from the pull-down. 86 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 87
    locate function You can directly input a time and locate to it. Touch the Manual Locate button on the Home Screen to open the MANUAL LOCATEscreen. Touch the FRAME EDITbutton to set whether or not the frame value can key to confirm a setting and its ESC key to clear all the values. 87 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 88
    a region (take) is divided or the recording region (take) reaches the maximum size, the confidence monitoring playback sound will be interrupted for a few seconds. 88 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 89
    Switchable), the following operations can be used to turn the online playback mode on/off.  HS-4000 front panel: Press the ONLINE key Outputs during online playback The relationship between online playback mode page" of "Mixer settings (MIXER SETUP)" in 10 - Internal settings.) 89 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 90
    is pressed, and set whether the two banks of flash start keys have 12 or 16 buttons each when using the TASCAM RC-HS32PD remote controller (sold separately) in dual playlist mode. For details, see the "GENERAL page" of the , touch the key for the lined up take (yellow key) again. 90 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 91
    (See "Editing mark positions" on page 86 and "Editing mark names" on page 86.) ● Inputting manual locate points (See "Manual locate function" on page 87.) ● Editing time code offset (See "SYNC page" on page 74.) 4 FLASH 5 FLASH 6 FLASH 7 FLASH 8 FLASH 9 FLASH 10 FLASH 11 FLASH 12 91 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 92
    to record in or play back. In playlist mode, load the session that you want to play back. (Support for modes in addition to timeline mode is planned for a future firmware version upgrade.) 2. Either of the There is no rechase function as there is with synchronized playback. 92 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 93
    so could damage data on the CF card and even make data unreadable. For details, please see the manuals for your computer, card reader or other device being used for this purpose. 7. After writing data completes entire projects and, especially, cards takes considerably more time. 93 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 94
    Troubleshooting If the operation of this unit becomes irregular, please check the following things before requesting repair. If the following measures do not resolve the problem, contact the store where you purchased the device or a TEAC . Erase unnecessary data and then try again. 94 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 95
    16 - Messages The following is a list of messages that the HS-4000 shows in pop-up windows. Refer to this list to learn more about each message as well as how to The maximum number of projects that can be created has already been reached, so a new project cannot be created. 95 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 96
    , and formatting n = 1 or 2 could not be completed. CFn has no projects. Please create a project. The CF card does not have even one project. n = 1 or 2 96 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 97
    to AES31. "aaaaaaaa" The currently loaded session will be exported in an aaaaaaaa = the AES31 editing information file AES31 editing information file. name created 97 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 98
    cannot be found. Select a session. The file is loading. Confirm that you want to load the selected project. pppppppp = name of project to load 98 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 99
    . Sampling frequency does not match Play Error. An error occurred during playback. Play Error Buffer underrun Data reading could not keep up during playback. 99 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 100
    rebuild the current project. Confirm that you want to rebuild the current session. Rebuilding failed. Confirm that you want to rebuild the selected project. 100 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 101
    cannot be made. Make a project. There is no Sessions. Please make a Session. There is no session so the recording cannot be made. Make a session. 101 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 102
    type Undoing an edit has completed. The format of the file that you tried to play or add to a playlist is not supported. The sampling frequency of the file that you tried to add to a playlist is not supported. Recording information is being written when recording has stopped. 102 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 103
    Output Ref. Lvl PHONES jack Connector: standard 6.3-mm (1/4") stereo jack Maximum output level: 45 mW + 45 mW or more (THD+N 0.1% or less, into 32 Ω) 103 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 104
    10 Vp-p/110 Ω Input impedance 110 Ω ±20% Format: AES3-2003/IEC60958-4 (AES/EBU) IEC60958-3(S/PDIF) Supported sampling frequencies: 44.1/47.952/48/48.048/88.2/96 kHz(single/double) Note: When SRC is ON, the ANALOG IN to ANALOG OUT: 100 dB or less (JEITA) (recording and playback) 104 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 105
    Other specifications Power AC 100-240 V, 50-60 Hz Power consumption 25 W External dimensions (W x H x D) 482.6 x 94 x 317.1 mm Weight 5.1 kg Operating temperature range 5-35º C 17 - Specifications 105 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 106
    17 - Specifications Dimensional drawings 106 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 107
    Block diagram 17 - Specifications 107 TASCAM HS-4000
  • TEAC HS-4000 | HS-4000 Owner's Manual - Page 108
    HS-4000 TEAC CORPORATION Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan http://tascam.jp/ TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA http://tascam.com/ TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
HS-4000
4 Channel Audio Recorder
D01134020A
OWNER'S MANUAL