TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 120

16.2 dot1x handshake Description The dot1x handshake command is used to enable the handshake feature. The handshake feature is used to detect the connection status between the TP-LINK 802.1x supplicant and the switch. Please disable the handshake feature if you are using a non-TP-LINK 802.1x-compliant client software. This feature is enabled by default. Syntax dot1x handshake no dot1x handshake Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Disable the 802.1X handshake function: T1700G-28TQ(config)# no dot1x handshake 16.3 dot1x auth-method Description The dot1x auth-method command is used to configure the Authentication Method of IEEE 802.1X and the default 802.1x authentication method is "eap". To restore to the default 802.1x authentication method, please use no dot1x auth-method command. Syntax dot1x auth-method { pap | eap } no dot1x auth-method Parameter pap | eap --Authentication Methods. 104