TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 77

Parameter time --The timeout time, ranging from 5 to 30 in minutes. By default, the value is 10. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the timeout time of the HTTP server connection as 15 minutes: T1700G-28TQ(config)# ip http session timeout 15 10.4 ip http secure-server Description The ip http secure-server command is used to enable the HTTPS server within the switch. To disable the HTTPS function, please use no ip http secure-server command. This function is enabled by default. The HTTP and HTTPS server function cannot be disabled at the same time. Syntax ip http secure-server no ip http secure-server Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Disable the HTTPS function: T1700G-28TQ(config)# no ip http secure-server 61