TP-Link T1500-28PCT Jetstream Smart Switch Installation Guide - Page 14
Rack Installation
View all TP-Link T1500-28PCT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
JetStream Smart Switch Figure 2-1 Desktop Installation Feet Bottom of the Device Notch ■■ Rack Installation To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1. Check the efficiency of the grounding system and the stability of the rack. 2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws, as illustrated in the following figure. Figure 2-2 Bracket Installation Rack-mounting Bracket Screw 3. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack, as illustrated in the following figure. Figure 2-3 Rack Installation Rack Caution: ■■ Leave 5 to 10 cm gaps around the devices for air circulation. ■■ Avoid placing heavy things on the device. ■■ Place the device with its bottom facing downwards. ■■ Mount devices in sequence from the bottom to top of the rack and ensure a certain clearance between devices for the purpose of heat dissipation. 11 Installation