TP-Link T1500-28PCT Jetstream Smart Switch Installation Guide - Page 19
Via Omada Hardware Controller OC200/OC300, Omada Cloud Service, Via Omada Cloud-Based Controller - setup
View all TP-Link T1500-28PCT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
JetStream Smart Switch 3. Launch the Omada Software Controller and follow the step-by-step instructions to complete the Quick Setup. After the wizard is finished, a login screen will appear. 4. Enter the username and password you created and click Log in. Then you can further configure the controller. Via Omada Hardware Controller (OC200/OC300) Omada Hardware Controller (OC200/OC300), which is pre-installed with Omada Software Controller, is a good alternative if you have no spare PC to keep running Omada Software Controller in the network. It needs to be purchased additionally. For more details, refer to the Installation Guide of Omada Hardware Controller. * Omada Cloud Service After installing Omada Software/Hardware Controller, you can remotely access and configure the controller through Omada Cloud Service. Follow the steps below. 1. Enable Cloud Access on the setting page on the controller and bind a TP-Link ID to your controller. If you have configured this in the setup wizard, skip the step. 2. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar. 3. Enter your TP-Link ID and password to log in. A list of controllers that have been bound with your TP-Link ID will appear. Then you can click Launch to further configure the controller. ■■ Via Omada Cloud-Based Controller Figure 4-3 Manage the network via Omada Cloud-Based Controller Router Omada Cloud-Based Controller Switch EAP EAP EAP Clients Before managing the switch via Omada Cloud-Based Controller, make sure the devices can access the internet. 1. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar. Enter your TP- Link ID and password to log in. Configuration 16