TP-Link T1500G-10MPS T1500G-10MPSUN V1 CLI Reference Guide - Page 24
Accessing, Prompt, Logout or Access the, next mode
View all TP-Link T1500G-10MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
link-aggregation and some other modes, which is shown as the following diagram. User EXEC Mode Privileged EXEC Mode Global Configuration Mode Interface Configuration Mode Interface gigabitEthernet Interface link-aggregation Interface range gigabitEthernet Interface range link-aggregation Interface vlan ...... VLAN Configuration Mode The following table gives detailed information about the Accessing path, Prompt of each mode and how to exit the current mode and access the next mode. Mode Accessing Path Prompt Logout or Access the next mode User EXEC Mode Privileged EXEC Mode Primary mode once it is connected with the switch. Use the enable command to enter this mode from User EXEC mode. Global Configuration Mode Use the configure command to enter this mode from Privileged EXEC mode. T1500G-10MPS> T1500G-10MPS# T1500G-10MPS(config)# Use the exit command to disconnect the switch. Use the enable command to access Privileged EXEC mode. Enter the exit command to return to User EXEC mode. Enter configure command to access Global Configuration mode. Use the exit or the end command or press Ctrl+Z to return to Privileged EXEC mode. Use the interface gigabitEthernet port or interface range gigabitEthernet port-list command to access interface Configuration mode. Use the vlan vlan-list to access VLAN Configuration mode. 11