TP-Link T1500G-10MPS T1500G-10MPSUN V1 CLI Reference Guide - Page 59
user access-control mac-based
View all TP-Link T1500G-10MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Syntax user access-control ip-based { ip-addr ip-mask } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] no user access-control [ ip-based index id ] Parameter ip-addr -- The source IP address. Only the users within the IP-range you set here are allowed to access the switch. ip-mask --The subnet mask of the IP address. [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] -- Specify the access interface. These interfaces are enabled by default. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Enable the access-control of the user whose IP address is 192.168.0.148: T1500G-10MPS(config)# user access-control ip-based 192.168.0.148 255.255.255.255 6.4 user access-control mac-based Description The user access-control mac-based command is used to limit the MAC address of the users' access. Only the user with this MAC address you set here is allowed to access the switch. To cancel the user access limit, please use no user access-control command. Syntax user access-control mac-based { mac-addr } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] no user access-control 46