TP-Link T1500G-10MPS T1500G-10MPSUN V1 User Guide - Page 209
Transmit Delay, Reinit Delay, Notification, Interval, Fast Start Times
View all TP-Link T1500G-10MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Transmit Delay: Reinit Delay: Notification Interval: Fast Start Times: Enter a value from 1 to 8192 in seconds to specify the time for the local device to transmit LLDPDU to its neighbors after changes occur so as to prevent LLDPDU being sent frequently. The default value is 2. This parameter indicates the amount of delay from when LLDP status becomes "disable" until re-initialization will be attempted. The default value is 3. Specify the interval of Trap message which will be sent from local device to network management system. The default value is 5. When the port's LLDP state transforms from Disable (or Rx_Only) to Tx&Rx (or Tx_Only), the fast start mechanism will be enabled, that is, the transmit interval will be shorten to a second, and several LLDPDUs will be sent out (the number of LLDPDUs equals this parameter). The default value is 3. 14.1.2 Port Config On this page you can configure all ports' LLDP parameters. Choose the menu LLDP→Basic Config→Port Config to load the following page. Figure 14-2 LLDP Port Config 200