TP-Link T1500G-10PS T1500G-10PSUN V1 CLI Reference Guide Guide - Page 82
ip dhcp snooping decline rate
View all TP-Link T1500G-10PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Set the Flow Control of GigabitEthernet port 1/0/2 as 20 pps: T1500G-10MPS(config)#interface gigabitEthernet 1/0/2 T1500G-10MPS(config-if)#ip dhcp snooping limit rate 20 8.11 ip dhcp snooping decline rate Description The ip dhcp snooping decline rate command is used to enable the Decline Protect feature and configure the rate limit on DHCP Decine packets. The excessive DHCP Decline packets will be discarded. To disable the Decline Protect feature, please use no ip dhcp snooping decline rate command. Syntax ip dhcp snooping decline rate value no ip dhcp snooping decline rate Parameter value -- Specify the rate limit of DHCP Decline packets, and the optional values are 0, 5, 10, 15, 20, 25 and 30 (units:packet/second). It default value is 0, which stands for "disable". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the rate limit of DHCP Decline packets as 20 packets per second on Gigabit Ethernet port 1/0/2: T1500G-10MPS(config)#interface gigabitEthernet 1/0/2 69