TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 259
snmp-server traps link-status
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
disable the sending of SNMP standard traps, please use no snmp-server traps snmp command. Syntax snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart | auth-failure ] no snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart | auth-failure ] Parameter linkup -- Enable linkup trap. It is sent when port status changes from linkdown to linkup. By default, it is enabled. linkdown --Enable linkdown trap. It is sent when port status changes from linkup to linkdown. By default, it is enabled. warmstart -- Enable warmstart trap. It is sent upon SNMP function reboot. By default, it is enabled. coldstart -- Enable coldstart trap. It is sent upon switch reboot. By default, it is enabled. auth-failure -- Enable the auth-failure trap. It is sent when a received SNMP request fails the authentication. By default, it is enabled. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Enable SNMP standard linkup trap for the switch: T1500G-10MPS(config)# snmp-server traps snmp linkup 25.9 snmp-server traps link-status Description The snmp-server traps link-status command is used to enable SNMP link status trap for the specified port. To disable the sending of SNMP link status trap, please use no snmp-server traps link-status command. Syntax snmp-server traps link-status no snmp-server traps link-status 246