TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 99
logging monitor
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Syntax logging host index idx host-ip level no logging host index idx Parameter idx -- The index of the log host. The switch supports 4 log hosts at most. host-ip -- The IP for the log host. level -- The severity level of the log information sent to each log host. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be sent to the corresponding log host. By default, it is 6 indicating that the log information marked with 0~6 will be sent to the log host. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Enable log host 2 and set its IP address as 192.168.0.148, the level 5: T1500G-10MPS(config)# logging host index 2 192.168.0.148 5 11.7 logging monitor Description The logging monitor command is used to display the system logs on the terminal devices. To disable logging to the terminal, please use no logging monitor command. This function is enabled by default. Syntax logging monitor no logging monitor Command Mode Global Configuration Mode 86