TP-Link T1600G-18TS T1600G-18TSUN V2 Installation Guide - Page 15
Rack Installation
View all TP-Link T1600G-18TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Figure 2-1 Desktop Installation JetStream Smart Switch Feet Bottom of the Device Notch ■■ Rack Installation To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1. Check the grounding and stability of the rack. 2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws, as illustrated in the following figure. Figure 2-2 Bracket Installation Rack-mounting Bracket Screw 3. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack, as illustrated in the following figure. Figure 2-3 Rack Installation Rack Caution: ■■ Please set 5 to 10cm gaps around the device for air circulation. ■■ Please avoid any heavy thing placed on the device. ■■ Please place the device with its bottom facing downwards. ■■ Please mount devices in sequence from the bottom to top of the rack and ensure a certain clearance between devices for the purpose of heat dissipation. Installation 11