TP-Link T1600G-18TS Jetstream Smart Switch Installation Guide - Page 16
Initialization
View all TP-Link T1600G-18TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
JetStream Smart Switch Figure 3-3 Connecting to Power Supply Note: The figure is to illustrate the application and principle. The provided plug and the socket in your region may differ from the figures above. 3.5 Initialization After the device is powered on, it begins the Power-On Self-Test. A series of tests run automatically to ensure the device functions properly. During this time, its LED indicators will respond in the following order: 1. The PWR LED indicator lights on all the time. The SYS LED and the LED indicators of all the ports keep off. 2. (For TL-SG2210MP/TL-SG2428P/TL-SL2428P) After about one minute, all LED indicators will turn green, and then the FAN indicator and LED indicators of all the ports will turn yellow momentarily. Subsequently, all LED indicators except the PWR LED will turn off. (For other switches) After about one minute, the SYS LED and LED indicators of all the ports will flash momentarily and then turn off. 3. Several seconds later, the SYS LED indicator will flash, which represents a successful initialization. 13 Connection