TP-Link T1600G-28PS Jetstream Smart Switch Installation Guide - Page 11

JetStream Smart Switch Chapter 2 Installation 2.1 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One Switch One Power Cord Installation Guide Business Networking Solution Installation Guide Two mounting brackets, eight screws and four rubber feet 2.2 Safety Precautions To avoid any device damage and bodily injury caused by improper use, you should observe the following rules. ■■ Safety Precautions ■■ Keep the power off during the installation. ■■ Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is well grounded. ■■ Use only the power cord provided with the switch. ■■ Make sure that the supply voltage matches the specifications indicated on the rear panel of the switch. ■■ Ensure that the switch is installed in a well-ventilated environment and its ventilation hole is not blocked. ■■ Do not open or remove the cover of the switch. ■■ Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never use any other liquid cleaning method. ■■ Place the device with its bottom surface downward. ■■ Site Requirements Temperature/Humidity 40°C 0°C Installation 08