TP-Link T1600G-28PS Jetstream Smart Switch Installation Guide - Page 18
Controller Mode - change ip
View all TP-Link T1600G-28PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
JetStream Smart Switch For the detailed configurations, refer to the User Guide and CLI Guide. The guides can be found on the download center of our official website: https://www.tp-link.com/download-center.html Note: For certain devices, you may need to change the password the first time you log in, which will better protect your network and devices. 4.3 Controller Mode Controller Mode applies to the large scale network with mass devices. All devices can be centrally configured and monitored via Omada Software Controller, Omada Hardware Controller or Omada Cloud-Based Controller. Note: Before the following configurations, make sure the switch can access the internet. When using Omada Software/Hardware Controller, make sure the switch and the controller are in the same subnet. Typically, the switch obtains IP address from the DHCP server. You can check the switch's IP address on the DHCP server. ■■ Via Omada Software/Hardware Controller Figure 4-2 Manage the network via Omada Software/Hardware Controller Router Switch Or Controller Omada Hardware Controller Omada Software Controller (OC3200/300) running on the Host PC EAP EAP EAP Via Omada Software Controller Clients 1. On the PC with Windows OS or Linux OS, download the Omada Software Controller installation file from https://www.tp-link.com/support/download/omada-software-controller/. 2. Run the file and follow the wizard to install the Omada Software Controller. 15 Configuration