TP-Link TD-VG5612 TD-VG5612 V1 User Guide - Page 43
PPP Username/Password/Confirm Password, Default Gateway
View all TP-Link TD-VG5612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
TD-VG5612 300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide Figure 4-13 PPP Username/Password/Confirm Password: Enter the User Name, Password and Confirm Password provided by your ISP. These fields are case-sensitive. Connection Mode: For PPPoE connection, you can select Always on or Connect on demand or Connect manually. Connect on demand is dependent on the traffic. If there is no traffic (or Idle) for a pre-specified period of time, the connection will tear down automatically. And once there is traffic send or receive, the connection will be automatically on. Authentication Type: Select the Authentication Type from the drop-down list, the default method is AUTO_AUTH, and you can leave it as a default setting. Enable IPv 4: Check this box to enable IPv4. Default Gateway: Select a WAN connection from the drop-down list as the IPv4 default gateway. Enable IPv 6: Check this box to enable IPv6. Addre ssing Type : Select the Addre ssing Type from the drop-down list. 32