TP-Link TD-W8901G Quick Installation Guide - Page 1

Note Please use only wired network connections to configure the router. Power down all your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your computer to the Port labeled "1~4" on the Router with an Ethernet cable. Connect the splitter to the wall jack using a telephone line, then use the other telephone line to directly connect it to the LINE port on the Router and the MODEM port of the splitter, also have the PHONE port of the splitter connected to a telephone. Note If no telephone is needed, please connect the LINE port of the Router to the wall jack using the telephone line directly. 1